Secrets of using acrylic powder to strengthen nails

What kind of material is this, how is it used in nail art?

Acrylic powder is a synthetic, that is, not a natural material. Essentially it is a powder made from plastic, from artificial polymers. Previously, this substance included a component very harmful to the human body - methyl methacrylate. This substance contributed to the occurrence of allergic reactions and had a negative effect on internal organs - kidneys, liver, central nervous system. In the modern production of acrylic powder, methyl methacrylate has been replaced with another component; it is of higher quality and safer, or rather, practically harmless. This component is called ethyl methacrylate.

Acrylic powder, applied to the nail plates using a simple technology, protects the surface from negative effects, promotes strengthening and growth, helps to form the correct shape or lengthen the nails.

What are the advantages of this tool

Acrylic powder is a modern material for nail art and manicure, which has a lot of advantages:

Using this material, a woman has the opportunity to have well-groomed hands. Nails, even with extensions, look as natural as possible.
Wide range of applications, versatility in solving a wide variety of problems.
Easy to apply and use. Acrylic powder can be applied in a beauty salon, in a nail bar, at home with a private master, or independently at home.
The product is also easy to remove; the surface of the nail plate is not damaged in the process.
An incredibly large selection of colors - from transparent to the most pigmented bright red and black. This makes it possible to implement any design, no matter how original it is.
The structure is quite porous, which allows the nail plates to breathe under the dense polymer coating.
Protecting fabrics from the effects of negative environmental factors - ultraviolet rays, dirt, frost, chlorinated water and household chemicals.
Composition safe for nails. The use of acrylic powder does not cause allergic reactions, chemical intoxication or other complications in 95-97% of visitors to beauty salons. This material can be used for manicure by women of any age, even teenagers and pregnant and breastfeeding mothers. However, during pregnancy and lactation, it is advisable to do an acrylic manicure not on your own, but in a salon, after making sure that the master will use only high-quality material with a safe composition.
Optimal consistency - the powder does not spread over the surface of the nail, does not clog into the side rollers, does not flow onto the cuticle, which not only spoils the appearance, but also reduces the quality and durability of the manicure.
Increased strength of the material, which not only helps protect nails, but also extends the “life” of the manicure. For a long time, the coating made of acrylic powder does not split, crack, delaminate, or undergo other damage. Therefore, a woman can count on the fact that a manicure made with acrylic powder will last as long as necessary, and will look great all this time.
If acrylic powder is used, you can always repair or correct the manicure. If the surface of the polymer coating is damaged for some reason (cracked, chipped), you can sign up for correction and correct the defect.
As the nails grow, corrective measures can be carried out without removing the main layer of coating. Thanks to this, the nails experience less stress and are not subject to unnecessary stress.
To use acrylic powder, you do not need to have a special drying lamp. This distinguishes this material from shellac and gel polish, which are also used to strengthen nails and manicure.
The consumption of acrylic powder is quite economical. Experts say that 20 grams of powder is enough to carry out 20 to 30 procedures to strengthen or extend nails. Half of this amount of the drug is enough to make from 10 to 15 colored Frenchies.
The powder is available in packages of different sizes, which is very convenient both from an economic point of view and in terms of ease of use. Small jars are suitable for use at home, while large jars are an excellent solution for salons with high customer traffic.
Working with acrylic powder does not take much time. Hardening, that is, polymerization of the material, takes a few minutes, especially if you use powder marked high speed, which dries faster than others. However, you have to work with such material very quickly; it must be used by people with appropriate qualifications.

What is it, what are the advantages and disadvantages of the material?

Acrylic powder is a crushed synthetic powder that has strengthening properties. Acrylic was first used in dentistry, and only later it gained popularity in the manicure industry.

Penetrating into microcracks along with the gel, acrylic, under the influence of ultraviolet radiation, seals all damage. It strengthens nails and helps in correcting even serious “breakages”. Use it like those whose gel polish does not last as long as it should. Acrylic makes nails harder, so they retain elasticity and break much less.

Acrylic powder does not have a healing effect .
Strengthening is explained by the creation of an additional protective layer. Initially, acrylic powder was used only for extensions. It is quite plastic and, after drying, gains maximum strength. It is these properties that make it possible to use it to “repair” the nail plate, and later to prevent chipping and peeling. The use of the material allows the nails to look natural and maintain strength for a long time. It also does not require specific care.

Nail plates coated with acrylic powder look well-groomed. The powder itself is impossible to notice on the nails. Acrylic masks almost all imperfections, and the reinforcement is completely safe. But it's not all positive aspects. also noted:

High quality acrylic covers the entire nail plate. The material does not spread and does not harden prematurely. It's quite easy to work with. The powder can also be used to create various designs.
The material qualitatively strengthens the plates. You can use it without decoration - in itself it looks natural and neat. The powder fills all existing cracks.
Strengthened nails can easily withstand elevated temperatures and any other loads. They do not soften when kept in water for a long time or when in contact with household chemicals.
With acrylic, natural nails receive enough oxygen. A vitamin composition can be applied underneath it, which will provide additional strengthening and nutrition to the nails.
The powder is easily removed. For this, special solutions are used. Since there is no need to file down the top layer, the plate is not damaged.

Despite the fact that acrylic powder has a number of advantages, one cannot fail to note its disadvantages:

Poor quality powders can lead to an allergic reaction. Failure to comply with the technology can even lead to injuries to the nail plate. For a positive result, it is important to adhere to all the rules.
The powder hardens quickly, so you need to work with it as quickly as possible.
The material cannot be used for nail fungus - it can aggravate the course of the disease.
Strong specific smell. It can cause headaches and malaise. It is important to ventilate the room where you work with acrylic.
After covering with powder, nails lose their natural shine.

Disadvantages of the material

There are not too many disadvantages of acrylic powder, but you need to know about them when deciding whether or not to use this material for manicure:

When working with some types of acrylic powder, a sharp, very unpleasant odor may arise, which can even be intoxicating. Therefore, this substance should only be used in a well-ventilated area and using a medical mask. However, today such products are becoming less and less common on sale; they are being actively replaced by acrylic powders, which have a neutral odor.
This substance is quite expensive, which often discourages those who want to get an acrylic manicure. However, it is worth considering that one jar of powder lasts a long time, especially when it comes to manicure at home.
You need to work with diluted acrylic powder quickly, otherwise you will not be able to do without the need to redo the result. The average hardening time of the acrylic mass is half a minute.
The acrylic mass may chip off the nail plate. However, the main reason for such troubles is the inexperience or negligence of the master who did the manicure.
Strengthening and extending nails using acrylic mass can take a long time - approximately 1.5-2 hours. The duration of the procedure depends on the qualifications of the master and the complexity of finishing techniques. However, it should be borne in mind that the procedure is performed quite rarely - once every few weeks, so its duration should not cause much inconvenience.
The nail plate may be injured during the process of removing the material. This problem also arises due to inexperience and lack of skill in handling abrasive tools and cutters.

Acrylic powder has no other disadvantages, so it is widely used both in beauty salons and at home, making women's lives more comfortable.

Cons of acrylic reinforcement

But despite the large number of important advantages, one cannot help but recall the disadvantages of the material.

When using low-quality powders, you risk experiencing allergic reactions. And if the application technology is not followed, you can even injure the plate. So follow all the rules of strengthening, and the result will please you.
Powder can become hard too quickly, so you need to work with it very quickly. Otherwise, you will have to do everything again.
The material is contraindicated for girls with nail fungus. Such coverage will only worsen the course of the disease.
Acrid smell. Due to the specific pungent odor, malaise may occur. If you don't tolerate chemical scents well, go for a more expensive material.
Powder eliminates the natural shine of nails. In other words, you can only count on matte designs.

True, all these disadvantages are insignificant if you do not have allergies. And if you plan to use acrylic for subsequent application of gel polish, the result will certainly surprise you.

Types of acrylic material for strengthening nails and manicure

There are several types of acrylic powder, each of which has its own application in manicure and nail care. The main types of this material:

Universal transparent powder. This powder has a wide range of uses, but is mainly used to strengthen the nail plate, as well as to build up (lengthen) natural nails. If we consider the function of transparent acrylic powder in decorative manicure, then it is excellent for performing the French technique. You can add a variety of pigments to the transparent mass, giving it the desired shade, varying the color saturation. Additives such as glitter, rhinestones and other decorative elements can also be used. The finish of transparent powder can be either glossy or matte.
Camouflage acrylic powder, usually in a flesh-colored, close to natural shade. It is used mainly to hide aesthetic defects, irregularities, and damage to the structure of the nail plates. This material is slightly denser than transparent powder. But it is distinguished by excellent plasticity, pliability, and flexibility. This allows you to effectively strengthen the weakest nail plates.
Colored product - used to strengthen nails and at the same time for design and decoration.
Neon powder - used for decorative holiday nail coating.
Preparation for finishing coating. This material is used to give a manicure a finished look, achieve the desired aesthetic effect, and give the coating shine and gloss. This powder models well, is easy and pleasant to work with, and can be easily processed with professional tools.

Indications for use

Acrylic powder helps solve many problems with the condition of the nail plates:

Thin, brittle nails.
Unevenness of the nail plate, the presence of tubercles or other defects.
Changes in nail color, partial pigmentation, spots.
Nails do not hold up well to any decorative coating, including durable ones like shellac.
Acrylic powder can also be used on healthy nails to create nail art of any complexity.

What is better to use in the salon and at home: acrylic or gel?

The main alternative to acrylic powder is strengthening nails with gel or biogel. Gel and biogel include resin from coniferous trees. It does not provoke allergies and is often included in antifungal agents. The advantage of these materials is that they are easier to apply.

Acrylic powder has a more pronounced positive effect on fragile nails. This is an excellent material that makes it possible to strengthen the nail plate quickly and effectively. But working with it is more difficult than with gel and biogel, so it is important to first familiarize yourself with all the intricacies.

Strengthening your nails with acrylic powder helps increase the wear time of gel polish and grow long, strong and healthy nails without extensions. The material can be used both in salons and at home. But in any case, try to adhere to all the rules for its use.

What you need to use acrylic powder

Working with the drug, as with any other material for nail art, requires a certain set of tools. If you want to use the substance at home, you can buy a ready-made kit or purchase what is listed below separately.

A set of necessary tools and materials for working with acrylic powder:

Powder of the type you need.
A liquid used to dilute acrylic powder. It is called liquid and is a monomer containing plasticizers. The liquid does not change the original shade of the substance.
Primer and nail bonder. The use of a primer will allow you to obtain a durable coating, as well as eliminate microorganisms living on the nails, and prevent the development of fungal infections of the nail plates. The primer can be acidic or non-acidic. The first one is suitable if a woman’s hands often sweat. It has drying properties. The second is used if the condition of the nails leaves much to be desired. It optimizes the structure of thin and sensitive nail plates. The bonder will create roughness, which will promote better adhesion of materials.
A special brush that has a flat shape.
Forms for nail extensions (if you plan to carry out such procedures).
Special files, buffs, which will be used as a material for polishing.
A liquid that can be used to degrease the nail plates, thus preparing them for the application of acrylic powder. If you do not use a degreaser, the adhesion (adhesion) of the material to the nail surface will not be of sufficient quality.
It is important to buy all tools and materials exclusively from official retail outlets and trusted sites. Otherwise, you can easily get a counterfeit, expired, or simply low-quality product that will not give the desired effect and can be harmful to health.

How to work with acrylic powder

Using acrylic powder is challenging because to get a quality result, you need to act quickly, which requires practice. To understand how to work with the material, it is recommended that you not only carefully read the instructions described below, but also watch the video (preferably several times). Keep in mind that it is better to allocate 1.5-2 hours of free time for extensions, and if you are going to do a design, expect that the procedure may drag on for an indefinite period, especially if you have no previous experience.

For nail design

Acrylic powder is ideal for matte designs, which have recently become more popular than gloss. Instructions for the simplest single-color powder coating:

Degrease the nail plate with a primer. If there is no special liquid, use alcohol or salicylic acid.
Apply manicure base.
Depending on the base chosen, dry the coating under a lamp (several seconds) or in air (up to one minute).
Apply gel polish on top that matches the color of the selected powder.
Open the jar of material and dip the edge of your nail into it. Ideally you should "seal" it.
Take a special spatula and sprinkle powder on top so that it covers the entire nail plate.
Dry the coating in a UV lamp for 30-40 seconds.
Shake off any remaining powder with a stiff brush. It can also correct unevenness and remove other flaws.
Repeat for each finger.

If you want to make a design, at stage 4, dry the nail in a lamp, and then use transparent shellac to depict the selected design on the plate. Next, repeat all steps, starting from step 6. The powder will remain only in those places where the undried varnish was. If you want to get a more complex design or cannot draw the design you like on your own, use special stencils (sold in online stores for nail artists).

How to change tariff on Beeline
Pork knuckle baked in the oven
5 delicious recipes for salting fish at home

For extension

Acrylic powder is ideal for nail extensions - the result is natural, durable, but elastic. Before the procedure, the fingers must be treated: the old coating is removed, disinfected, degreased, and the cuticle is removed or pushed back. In addition, the nails need to be filed a little on top (don’t overdo it!) to ensure good adhesion of the material to the plate. Complete instructions on how to do extensions with acrylic powder:

Place a mold or tip on each finger.
Mix the powder with the monomer (another name is liquid) until a thick consistency is obtained.
Take a small ball of the resulting mixture with a brush.
Distribute it over the nail plate, starting from the cuticle and towards the free edge.
Wait for the acrylic mixture to harden. This happens very quickly: from 45 to 60 seconds.
Remove tips or forms.
Apply a special activator on top of the treated nail plate. This will ensure strength.
Take a nail file and file the free edge to the desired shape.
Treat the coating on top if it is too thick or there are uneven spots.
The last step is to polish the nail plate with a buff (a special rectangle, on each side of which there is a file, different in degree of abrasiveness from others).

Remember that you need to act quickly. After all, if you do something wrong, then before you build it up again, you will have to remove the old coating, and this is also time-consuming (see full instructions in the section just below). After the procedure is completed and you are satisfied with the result, you can apply regular or gel polish on top, draw an interesting design, or perform artistic sculpting, also with powder.

To strengthen

This procedure can be carried out in two ways. The first is simpler and less costly in terms of time and materials, the second imitates a similar manipulation in a salon. Which one to choose depends on the degree of weakening of the nails. Instructions for the first one:

Apply base coat.
Gently sprinkle the nail plate with powder.
Dry your fingers in a UV lamp for 20-30 seconds.
Remove any remaining substance with a brush.
Apply a special base on top.
Dry your nails in the lamp again.
Ready! You can paint the top with a plain varnish, make a design, or leave everything as is.

For the second method, you will need a strengthening kit and additional tools: a brush and a sanding file. How to treat your nail:

Apply manicure base.
Dry the nail in a lamp.
Open the jar of monomer.
Dip your brush into it and then dip it into the powder.
Distribute the resulting drop over the nail plate in the direction from the cuticle to the free edge.
Wait for the acrylic to dry (45-60 seconds).
Sand the surface with a nail file, eliminating any unevenness.
Cover your nail with polish.
Repeat steps 3-8 one more time.
Apply medicated oil to the cuticle.

How to use acrylic powder to strengthen your nails

To simply strengthen your nails without significantly changing the shape and size of the plates, you need to act in the following sequence:

A day before the procedure, you need to do a regular hygienic manicure. That is, wash your hands, straighten the length of the nails, adjust the shape with a brush, trim the cuticle and keratinized tissue on the sides of the nails. Don't forget to disinfect your tools first.
Degrease the surface using a special liquid or regular alcohol.
Apply a primer that will help improve the durability of your manicure.
Apply a base, you can use the one used in combination with gel polish.
Take a piece of paper and place your fingers over it. Using a small spatula, scoop up the powder and sprinkle it onto the wet base coat. Dry this layer using an LED or UV lamp. Pour the remaining crumbled powder back into the jar. The procedure can be carried out directly over the container with powder, then you do not have to pour the powder.
If necessary, if the nails are very weak and brittle, you can make not one, but several layers of acrylic powder. After this, the surface is sanded and a final pigmented coating is applied.
The second, simpler way to strengthen nails without using a drying lamp is to apply acrylic mass (powder diluted with liquid) to the prepared surface, carefully level it, and give the mass the desired shape. Then, when the substance has hardened, polish it and coat it with a finish.
To strengthen nails, it is not necessary to apply the material to the entire surface. In some cases, you can apply the drug only to the free edge and side edges. This way you can save powder and protect your nails if they tend to break constantly.

How to make a drawing with acrylic powder on gel polish?

Having learned a simple application technology, where the entire nail is covered with powder, you will very quickly want to try something more interesting and complex. Drawings with acrylic powder are a great choice for the next step towards mastery. Moreover, making them is very simple.

Step by step process:

Hygienic manicure. Removing the glossy layer from the nail, degreasing - everything as usual.
Apply base. Dry.
Cover your nails with shellac and dry the gel polish in a lamp for 2 minutes. If you want intense color and a more durable coating, apply not one, but two or three layers of shellac, curing each of them under UV rays.
Now start drawing. Take shellac (can be different, or the same as the main one) and draw lines with a thin brush. It’s better to start with simple patterns, or you can use special stencils.
When the design is ready, bring your finger to the jar and gently sprinkle the powder over the design with a spatula. Gently shake off excess without touching the surface. Cure in a UV lamp for 120 seconds.

Helpful tip: before applying acrylic powder to gel polish or nails, place a plate so that excess does not fall on the table. This will make it easier for you to clean your workspace.

How to use this nail extension product

Acrylic powder can be used for extensions, which will also provide additional strengthening of the nail plates. However, a little difficulty may arise during the extension process. The fact is that this material loses its plasticity in air, that is, it dries out, which complicates all manipulations. Therefore, experts strongly recommend that before carrying out the first extension, you need to practice on a mock-up and gain the necessary experience and get better at it.

Sequence of steps for nail extension with acrylic powder:

Wash your hands and do the usual hygienic manicure as described above (one day before extensions).
Degrease the nail plates and let dry.
Apply nail primer and let air dry.
Apply bonder (a preparation used to bond natural nails and artificial material), dry this layer using a drying lamp.
Pour some liquid, which serves to dissolve acrylic powder, into a small container. You can use a glass.
Fix the nail plate extension forms in the correct position.
Dip the tip of the brush into the liquid and then into the powder jar to pick up a small amount.
Quickly apply the mixture to the surface of the nail, using a brush to evenly distribute the substance, including over the fixed extension form. All movements must be precise, since the time for correction is limited, the acrylic mixture begins to thicken and harden.
As soon as the extension procedure is completed, the forms must be carefully removed and the nails brought to the desired look using nail files and a buff. Extended nails made from acrylic powder can be removed by filing.

Advantages and disadvantages of acrylic powder

Previously, methyl methacrylate was added to acrylic powder, which is why it was widely believed that the powder was dangerous and had a negative effect on organs and systems in the human body.

Now the component has been replaced with a safer one, which ensures the absence of side effects after the procedure.

Almost all salons now use the component; it has become widespread due to the large number of positive aspects:

Suitable for extension of tips or forms. The powder creates a uniform coating, so the extended nails look natural and match the natural base of the plate.
Safety. The composition is harmless to the girl’s body, as well as the quality of her nails, even with constant use of the powder at work.
No pungent odor.
Speed of manipulation. Acrylic is quickly fixed on a woman’s nails, and then polymerized in an ultraviolet lamp for 1-2 minutes. Even if you carry out the technique yourself, it takes up to 15 minutes to strengthen all the nails.
A large number of designs and ways to decorate the plate. Acrylic powder allows you to create unusual designs, as well as three-dimensional compositions on the surface that will last up to a month or more.

To learn how to work with acrylic powder, a girl just needs to watch a few video tutorials on the Internet. It is suitable for almost all bases and pigments, so no special preparation is required for its application.

If you use the composition correctly, you will not find any disadvantages, since it only increases the long-term preservation of the manicure, which is appreciated by all women. The only thing is that the nail technician may slightly increase the price of the service if he performs strengthening, since it increases the adhesion of the coating, which is why the correction will not be needed longer.

Possible options for removing acrylic manicure

If your nails are extended, the preferred way to return them to their original state is to file them down. To do this, you can use regular abrasive files or resort to cutting using a special device.

If you used acrylic powder as a coating to strengthen your nails, then you can remove it using a more harsh method - by soaking it with a special solvent. You can first cut off a thin layer of coating so that the solvent acts faster. Then you need to act like this:

Take five cotton pads and cut each one in half.
Soak the discs with a special acrylic-dissolving liquid (you can buy it where you purchased the powder).
Apply half of the disc to each nail, making sure that the cotton wool soaked in liquid does not come into contact with the skin of your fingers.
Secure the discs with pieces of regular foil. Or use special nail tips for this purpose. Wait 10-20 minutes.
Remove one disc and treat the nail with a soft orange stick, removing any remaining product from the plate. Only after this can you begin to cleanse the second nail and all subsequent ones. Those nails that are awaiting treatment should be under the disc and foil (tip).
After the procedure for removing the acrylic layer is completed, you need to wash your hands and apply a restorative agent to the cuticles and nails.

What is powder manicure with deep powder?

The manicure powder was created by specialists from the American company Kiara Sky Professional Nails. A manicure is performed using the entire set of products from the company that produces deep powder:

First, apply the base for the manicure - Bond nourishing agent.
Next you need to apply Base.
Then, without waiting for the base coat to dry, dip your nails in a transparent dip powder, then shake off the excess and apply the Base coat.
The nails are dipped into the colored powder, the Base coating is applied, the nails are dipped in the powder and covered again with the base.
Seal Protect is applied to the nails to help harden the dip powder. After drying, apply another layer again.
The final step is coating with Top Coat. When it dries, you need to treat the cuticle with oil.

Dip powder - dipping powder for manicure from the American brand Kiara Sky Professional Nails

Is it possible to extend the service life of acrylic powder?

Using acrylic powder to strengthen, build or design and decorate nails is not a cheap pleasure. Even if you carry out the procedure yourself, without going to a beauty salon. And the cost of services of a good specialist is even higher. Therefore, women who often use acrylic powder for manicure begin to wonder if it is possible to somehow extend the time during which this protective and decorative material stays on the surface of the nails. Indeed, careful handling and care can ensure that the coating lasts much longer. What you can do:

Try not to expose your nails to any chemical or natural, but aggressive substances. If you wash floors or dishes by hand, always use thick rubber gloves.
Do not expose your nail plates to mechanical stress. This means that you should not use your nails as a scratching tool or for other similar purposes.
Do not expose your nail plates to sudden temperature changes. For example, you should not immerse your hands that were in hot water into ice water, otherwise the acrylic coating may crack.

By following these simple recommendations, you won't have to worry about your acrylic manicure cracking or fading.

What is better to buy - original or analogues

Manicurists and nail art experts recommend, if you have the financial opportunity, to buy products from well-known brands and in trusted stores. Products from companies such as Kodi, Irisk Professional, TNL, InGarden, RuNail, INM, EzFlow Nail Systems, CND will not harm your health and will allow you to get high-quality, lasting results.

However, the products of these brands can be too expensive; not all women can allocate the appropriate amounts from the family budget to spend “on marigolds.” In this case, you can consider the option of purchasing an analogue of the original acrylic powder. This drug can be ordered on a Chinese or Korean website. And even find options with free shipping, saving on this point as well. However, by making such a purchase, you risk buying not just a cheaper counterfeit, but a product that can harm your nails and your body as a whole. The fact is that in China and Korea, dangerous methyl methacrylate is still used in the production of cosmetics. It is not prohibited in these countries. As a result, saving on the purchase of powder, you will get an unpredictable effect and the risk of intoxication.

How to check the quality of a product if you doubt its safety:

Carefully read the information on the packaging; if it is written in a foreign language, you can use, for example, Google translator. Make sure that the composition does not contain harmful substances, especially methyl methacrylate.
Evaluate what acrylic powder smells like; there should not be a pronounced chemical smell.
Experiment with the layout before using the material on your fingers. The substance should not spread and create nodules or tubercles. If there is the slightest doubt, it is better to refuse to use such a product.
Still, it is better to use original products from the listed companies. In the assortment of modern online stores of cosmetics, you can find quite acceptable offers in different price categories - from 200 to 1000 rubles for a bottle weighing 15-40 grams.

User reviews about acrylic powder

Acrylic powder and the advisability of using it to strengthen nails is one of the most discussed topics in the field of nail art. This drug receives many reviews, mostly contradictory and ambiguous. Fans of acrylic, as well as masters who prefer to work with this material, claim that the nail plates are well protected, acrylic-based manicures last well, and extended nails have natural flexibility and at the same time increased strength. Additional positive feedback arises regarding the fact that manicure can be adjusted without completely removing the previously applied material.

Negative comments mainly concern the following points:

Pathogenic microorganisms multiply under the dense coating, and there is a high probability of infection with a fungal disease.
Acrylic material strengthens nails, but in the process of removing it, which is carried out using fairly aggressive methods, the tissues are damaged and require some time to rest and recover. Therefore, after removing the persistent coating, you should not do a new manicure or wear long nails for a couple of weeks.
Acrylic powder is often counterfeited, as the product is very popular. In addition, if a manicure is performed in a salon or nail bar, it is not always possible to control the quality and safety of the materials used.

As you can see, both fans and defenders of this material have significant arguments in defense of their opinion. All you have to do is weigh the pros and cons, and, if the decision is positive, experiment with this substance at home or sign up for a procedure at a beauty salon.

A simplified method of applying acrylic under gel polish

The first option for using powder is very similar in technology to extensions, and sometimes causes minor difficulties for beginners. But don't be discouraged, because you can do differently. If you use acrylic to strengthen your nails under gel polish, then there is good news for you: there is an easier way to apply it, which does not require special skill or experience.

Preparation of nails should be the same in all cases, and you are already very familiar with it. But the process of applying powder looks different.

Step 1. Apply primer to prepared nails and let it dry.
Step 2: Cover your nails with a gel polish base coat.

Step 3. Without drying the base coat, simply dust your nails with acrylic powder until it covers them evenly. In this case, there should be no spots left on the plates free of powder. It is most convenient to do this directly over a jar of acrylic.

Step 4: Now dry your nails under a UV lamp. Typically, this process takes 1-2 minutes, depending on the power of the device.
Step 5. Using a brush, remove all excess from the skin and cuticles.
Step 6: Apply another base coat and let dry.
Step 7: Now remove the sticky layer from your nails and buff them gently.
Step 8. Apply colored varnish and topcoat on top as usual.