Design using wet gel polish is drawing on an undried coating, which allows you to make the image more natural due to the fuzziness and vagueness of the lines.
It requires flower beds of medium density, as well as a choice of thin, flat, beveled brushes, dots, toothpicks, and needles. There are also special products with a spreading effect from Nika Nagel, BlueSky, Gellaktic Mystic, MiiS. You can make beautiful patterns, abstract images, dots, cobwebs, twigs, shells, hearts. Drawing roses, butterflies, reptile skin, feathers, marble surfaces, and a bridal bouquet will require more skill.
Design features for wet gel polish
A wet gel polish design is an image, pattern or vague shapes that look as natural as possible. The technique itself gives them greater naturalness, because the wet coating makes all the lines a little fuzzy. To get the desired effect you need:
- choose a gel polish of medium consistency so that it does not spread instantly and at the same time easily mixes with other flower beds;
- use a suitable tool, because the details of the drawing can be larger or smaller.
Which varnish is best
For a vague design, it is important to choose the right gel polish:
- Well pigmented. If the flower garden leaves streaks, you will have to deal with them. Otherwise, the drawing will look sloppy.
- Correct consistency. A product that is too liquid will spread, may flow onto the cuticle or mix so that vague spots appear instead of a pattern. And thick textures do not mix well; soft transitions will not work.
If the gel polish is too viscous, it can be diluted with a liquid finishing agent.
How to apply drawings
Drawings are made:
- with a thin hair brush or liner,
- dotsami,
- a brush from a bottle of gel polish,
- orange stick,
- toothpick or needle,
- point brush, petal brush, beveled or flat.
The tool is chosen in accordance with the design and for reasons of convenience. Brushes are suitable with natural and synthetic bristles, even silicone ones. The main thing is that the gel polish does not slide off the instrument instantly.
Execution nuances
The main advantage of such designs on nails using wet varnish is their simplicity. Each girl, with due diligence and the availability of equipment, can independently tidy up her hands, decorating them with a beautiful design.
The procedure is performed according to a certain scheme:
- Nails are prepared. The cuticle is trimmed, trimming and shaping the plates, as well as treating the surface with a special nail file that smoothes and polishes the enamel.
- The surface is treated with a primer and degreaser.
- Apply a thin base layer and dry under a lamp.
- Cover with basic colored varnish and dry.
- The next layer is applied in a very thin layer, it should not spread.
- Dots of a contrasting shade of varnish are placed on the surface of the nail and a pattern is formed with a special needle. Decorative elements may be used.
- Dry your nails under a lamp.
- The final stage is coating with top varnish, which is also fixed under the lamp.
!— Yandex.RTB RA-461895-21 — >
—>
The design turns out very beautiful and looks impressive on decorated nails. You can choose several shades of coating to get more complex patterns.
Possible mistakes when creating nail designs using wet gel polish
Nail design using wet gel polish is also accessible to beginners, but difficulties may arise when performing due to:
- Wrong choice of flower garden. Too liquid and dense are not suitable. And to avoid unpleasant surprises when mixing, it is better to take products from one company.
- Poor quality manicure, errors in applying the base and the first layer of the flower garden. All this can create unevenness on the nail plate, which will interfere with the distribution of gel polish over the general background.
- Uncertain, repetitive or too intense movements of the instrument. This causes bald spots to form on a wet surface, rather than clear lines that should blur slightly.
There are many other factors that prevent you from doing the job beautifully and quickly: incorrect position of the hands (upside down), excessive tension, poor lighting, etc.
Several design ideas
Here are the most successful examples of nail design using the wet manicure technique:
- The easiest way is to put a few spots on the varnish with dots. They will become unusually blurry.
- To create snake skin, the spots are placed in a checkerboard pattern. After they blur, an unusual design is obtained.
- When painting, curls from dots are pulled out with a needle into original patterns: figure eights or loops.
- Flowers are drawn from five spots arranged in a circle. They form petals converging towards the center.
- The branches are made from dots of white varnish with green varnish dripped into the center. The pattern is formed by drawing with a needle. You can make a twig differently: put alternating dots in two rows and form each into a leaf going to the middle.
- The springs are formed from dots placed in a row (colors must be alternated). The pattern is made with dots, which are moved in a spiral.
- For the shell, the dots are placed in two rows along an arc. They are connected by a needle moving in a spiral.
- Roses are the easiest to draw. This technique is often used by nail art masters. For them, it is enough to draw lines in a circle in several rows, which will blur on their own and create a gorgeous flower.
- For a marble manicure, you need to mix black and white on a plate. Most often, some areas are darkened on a white background, and then the veins are drawn with a needle. In some places, the darkening is shaded with dots.
- An abstract drawing is made using several parallel lines placed closely. Mixing is carried out using dots - several movements are carried out along the lines in the forward and reverse directions. Place the tool perpendicular to the workpiece.
Wet gel polish drawings that beginners can do
Drawings using wet gel polish for beginners should be simple:
- smooth divorces,
- different sizes of dots or circles,
- abstract images,
- cobweb,
- simple ornament,
- hearts, shells, and other easy-to-make figures.
And it’s better to sketch out in advance on a piece of paper what you would like to have on your nails. This makes it possible to think through the movements of the tool in advance and determine the location of the parts.
Step by step drawing on wet gel polish is done like this:
- The nails are filed, the cuticle is cut or pushed back, and the skin around the plates is polished.
- Surfaces are treated with a buff to remove gloss.
- Nails and skin are wiped with a degreaser.
- After it evaporates, a primer is applied to the surfaces of the plates and ends, and allowed to air dry.
- The next stage of the gel polish base is its polymerization.
- Nails are painted with the first layer of flower garden.
- This coating must be dried and residual stickiness, if any, must not be removed.
- Apply another layer of gel polish of the main shade, do not polymerize.
- The second flower bed is laid out as a drop on the palette.
- By dipping a dots or other tool into it, they apply patterns to the undried layer of gel polish on the nails.
- The hand is placed in the lamp.
- Cover the nails with a finishing agent and polymerize it.
Divorces
Divorces can be done using 2 or 3-4 flower beds plus the main background, and there are 2 ways to do this. The first one is done like this:
- The prepared nails are covered with a base and dried.
- Apply 2 layers of the same color, leaving the second undried.
- Gel polishes of other shades are dripped onto the foil or palette separately from each other.
- Take each one in turn with thin brushes and use them to make lines on the nail along the undried base color.
- When the design takes on the desired appearance, the coating is polymerized.
- All that remains is to apply the top coat and dry it too.
Watch the video about design options for wet gel polish:
The second method is more difficult, but the divorces are more natural:
- The base is applied to prepared nails without leveling, so that in the end they do not look too thick.
- Cover them with the main color and dry.
- Additional shades of gel polishes are dripped onto each other onto the palette and mixed with a thin brush or dot until streaks appear.
- Using a wide brush, pick up this mass and transfer it to the nail, stretch it from the base to the free edge, without disturbing the formed lines.
- The same is done on the side parts of the plate.
- Use a thin brush to paint the space around the cuticle.
- Dry the coating.
- Next you need to apply the top coat and place your finger in the lamp.
With this method, you don’t have to paint the nail with the main color, but apply stains directly onto the dried base, because they will cover the entire surface. If such a technique seems difficult, stage 2 is not skipped. But stains from the palette are applied to part of the nail. And then they level the gel polish with a thin brush so that it does not lie in a lump.
Dots, circles
The dot pattern is one of the simplest, you just need to follow a few rules:
- The second and subsequent shades of the flower garden are dripped onto the palette so that they do not mix.
- From there they are taken with dots; you can use different sizes of tools.
- If the first gel polish is not dried on the nail, they leave marks on the surface of the second and subsequent flower beds.
- Decorate the entire plate or part.
- To make the dots of different diameters, apply several pieces of gel polish with one portion until it runs out.
- Immediately after application, the circles blur, so there must be a certain distance between them, otherwise the entire decor will merge into spots.
When the pattern is completed, it is dried and covered with topcoat. The dots can be made of the same shade or different.
Abstraction
An abstract image is beautiful because of its uniqueness, because you won’t be able to make exactly the same thing again. This design is done as follows:
- Drops of gel polish of different colors are placed next to each other on the palette so that one flows into the other.
- After preparation, the nails are covered with the main background and dried.
- Paint them again with the same color.
- Using a comb brush or other flat brush, scoop gel polishes from the palette, like a spatula.
- Transfer them to the nail slowly, making a broken line in one movement.
- You can turn the brush over and walk it next to the already applied stripe.
- If bubbles have formed on the surface due to the large thickness of the gel polish layer, they are removed with a tool with clean bristles.
- The abstractions are allowed to spread a little more for a couple of seconds and the finger is sent into the lamp.
- The top of the nail is covered with topcoat and it is also polymerized.
For abstraction, you should use at least 3 shades - contrasting and intermediate.
Patterns with cobwebs, twigs
Patterns in the form of a cobweb and a branchy ornament are very relevant this season and are easy to do:
- In the first case, 3 thin stripes are applied along the nail along the wet base gel polish. They should be parallel to each other, and their edges should be at a short distance from the end and cuticle. Using a toothpick or a needle, transverse lines are drawn from these strips at different levels in both directions so that they form a circle consisting of broken segments. This is how a web turns out.
- The branches begin to be drawn from points that are scattered quite far from each other. Using a needle or toothpick, they are pulled out to form leaves and connected to form stems. You can use different shades of gel polish.
Hearts, shells
To draw a shell, dots are placed on the nail plate so that they form a circle. Inside it you need another circle - a small one. It is pulled out with a thin brush so that you get a blot with uneven edges. It is necessary to connect this element with a large circle with thin lines. And also draw segments between the points that make up the outer circle.
The heart is drawn based on several marks made with a dots or a thin brush:
- one in the middle of the plate,
- two on each side of her and above,
- another point located below the central one.
The first mark is connected to those above with smooth lines. Curved stripes are drawn from the paired lateral points to the lowest one.
The heart can be made from circles. Use 2-3 shades of gel polish, place large and small dots with them so that overall they form the intended figure.
Manicure with stone texture
This is another new design of bright summer nails, which is done on a wet layer. In general, textures have become very popular. They do not require much time, which is important in the work of any master, and do not require special artistic painting skills. These designs are a real find for beginners in the nail industry. Check out the simple technique for doing manicure with stones and feel free to offer it to your clients.
Technique for creating stone texture on nails
These stones look most impressive on a white or black backing. It is also recommended to use camouflage. You can cover the nail completely with the design, or you can only partially, as shown in the photo above. In the latter case, casting, chromatic gel polish or thick glitter are suitable for framing the stone.
To create a stone-colored manicure, you need to choose the appropriate shades. To do this, find an illustration of a stone cut on the Internet and select several shades of gel polishes.
- Drop the main color onto the palette, then drop all the previously prepared colors into the center of this drop, one by one. You will get color circles. Take a toothpick and swipe randomly over the colors several times to create a pattern.
- Using a flat brush, scoop up the resulting mixture, moving from right to left. A brush is like a “spatula”. The gel polish should be on top of your brush.
- Place the brush on the nail so that the gel polish is on top and, using light pressure, transfer the colors onto the nail. Help them spread out and complete the design with a thin brush, moving it over the wet color layer so that the design looks like a cut of stone.
Important point
For convenience, we recommend using a gradient brush. Make sure that the “color mass” is transferred from the brush evenly and that the layer does not turn out to be too thick. Let this design dry a little longer than usual.
This bright summer manicure can be created without much effort or time.
Wet gel polish design: patterns for experienced craftsmen
Design schemes for wet gel polish can be more complicated, but they can only be completed with the ability to draw and sufficient practice in nail art:
- roses and other flowers,
- several small butterflies or 1 large one covering the entire plate,
- imitation reptile skin,
- feathers,
- marble texture,
- the bride's bouquet.
Roses
Roses are painted on a damp surface with a thin brush. First, a dot is placed in the center of the future flower.
Short, arched strokes are made around it, moving further and further from the middle. For greater naturalness, these lines should be of different thicknesses and lengths. They become thinner towards the ends.
For roses, choose a background that is lighter or darker than the flowers themselves. You can draw several small ones or 1 large one on the entire nail plate. Here, 2 gel polishes are enough - for the main background and the flower itself. But you can also use 3.
One covers the entire nail, the other is used as the main color of the rose, and the third draws the edges of its petals. That is, a stain is made on the dried base shade with another gel polish. And while it is wet, the third color is used to outline the petals. The last shade should be darker than the previous two.
You can additionally decorate roses with rhinestones, sparkles or acrylic powder to get velvet flowers. In the latter case, the top is not applied to these areas.
Painting with butterflies
Painting with butterflies is performed in the following sequence:
- Draw 3 intersecting lines. The central (shorter) one will be the basis for the body of the insect. Through a point just below its middle, 2 other lines are drawn so that the entire structure resembles the letter Z.
- Using a thin brush, a stroke is made from the side strips to create the outlines of the wings. The top ones should be larger than the bottom ones.
- Inside the wings you can make another outline, but in a different color. The body, along with the tail and mustache, is drawn in black or dark gray.
- You can add dots and irregular multi-colored spots inside the wings. Or paint these parts with one color. And along it make thin black lines from the insect’s body to the edges of the wings.
You can draw several of these butterflies on 1 nail. To simplify the task, use a bright general background and only 1 gel polish to outline the image.
How to Draw Reptile Skin
Drawing snake or crocodile skin is quite simple, since the main thing here is maintaining the distance between the elements. Dots are placed on the nail so that when they spread, they do not merge. First, perform 1 vertical row in the middle of the nail. Then they make adjacent ones, but put points at the level of the spaces between the parts of the first line. Thin partitions should form between the spots.
Watch the video on how to paint reptile skin using wet gel polish:
To make “reptile skin” look as natural as possible and seem textured, choose similar colors of gel polish. For example, if the main shade is blue, the dots are made blue. You can also outline the lines separating the spots with gold or silver paint. But this is done after drying.
Technique for drawing a butterfly
To depict a large butterfly, a different technique than mentioned earlier can be used:
- Drawing a silhouette of an insect in profile, covering almost the entire nail. It looks like the number 9, but completely shaded. Use black gel polish over undried light gel polish. And on a dark background with a thin brush they draw colored narrow lines and spots.
- Drawing with five colors that smoothly flow into each other. The main shade depicts an insect with outstretched wings. It looks like the number 9 and its mirror image. The inside of the image is outlined with a different color, then with a third color. The remaining shades are used to draw small details - dots, spots, lines.
Feathers
There are two ways to depict a feather:
- Place dots at a certain distance from each other and circle each one with several colors of gel polish to create multicolor circles. They are connected to each other by making movements from one to another with a dry thin brush. It is also used to make short strokes from the edges of each circle. The result is a multi-colored peacock feather.
- Drops of gel polish are placed along the nail on a damp surface so that they form a curved line. The size of the spots spreading from them should gradually decrease. A thin dry brush is drawn along this row to depict the shaft of the feather. Use the same tool to stretch the edges of the spots. For this scheme, you can use several colors of gel polish or just one.
Marble
Marble coating is done as follows:
- Nails are painted with light gel polish in 2 layers and both are dried.
- Then a liquid finish is applied.
- Black gel polish and thick top coat are mixed on the palette.
- This product is applied to a thin brush and used to make uneven, winding lines along the wet finish on the nail.
- They are combined in some places, shaded in other areas.
- When the pattern looks like marble, it is dried, coated with topcoat and polymerized again.
For the desired effect, you always need a light main background and a darker color to draw the veins.
The bride's bouquet
The composition “bridal bouquet” is made in pastel colors:
- On a damp base coat (pink, beige or white) paint 3 abstract spots with outlines similar to flowers. They must lie on line 1.
- After polymerization, flower leaves are painted on with silver gel polish. You can also use light green.
- The coating is dried again. Then the edges of the petals are painted with white gel polish, as in the image of a rose, as well as the veins on the leaves.
- All that remains is to cover everything with topcoat and polymerize it. For flowers you can use a matte finish, for the rest of the surface of the nail - glossy.
Manicure with sparkles and stones
Another express option for decorating nails with sparkles and stones can be useful for novice nail artists. It can also often be found in salons. Almost every craftsman has glitter and rhinestones in his arsenal. So, based on them you can make a “brilliant” manicure in the literal sense of the word.
The photo shows a manicure with stones and rhinestone decor of different diameters.
You already know how to attach rhinestones, so let’s take a closer look at performing light stretching with sparkles.
Design technology
Apply color. Cover your nails with a thin layer of top coat. Carefully place a strip of thick gel polish with glitter on the edge near the cuticle or at the end. Use a thin brush to stretch the glitter over the wet layer of top coat using vertical movements. Due to the “wet” layer of top, they should be well distributed over the surface. Dry the resulting result and cover it with a finishing layer of glossy topcoat, immediately laying out the rhinestones.
The versatility of this design lies in the free choice of the main color of the gel polish. Black, blue, red shades are perfect, as well as brighter summer colors - yellow, orange and coral.
What are the mistakes when painting on wet gel polish?
Painting on wet gel polish fails for several reasons:
- Incorrect base application. If it lies in lumps, a flower bed applied to a wet coating may flow in the wrong place.
- Air bubbles at the base of the nail. This happens when a manicure is of poor quality, when the cuticle is unevenly cut or not pushed back enough. The same problem as in the previous case is possible.
- Incompatibility of the means used. First of all, these are gel polishes, which are chosen for the general background and for painting on it. They may mix poorly, leak or shrink, and the design will not come out.
- Insufficient drying of the design. With some of them, there is a lot of material on the nail, and the standard 2 minutes in a UV lamp or 30 seconds in an LED lamp is not enough. The design lags behind the nails, despite the presence of a topcoat on top.
Tips for beginners
To get the design right the first time, you should use the secrets of experienced craftsmen:
- All movements and brush strokes must be clear. There is no need to carry the tool several times over the same place, this will lead to the appearance of bald spots.
- If the stains seem unsightly, they can be corrected. To do this, take a dry and clean brush, and wipe the bristles on a napkin from time to time.
- To make the design more expressive, you can use glitter gel polish where appropriate. It is also used to paint the contours of individual parts.
- It is important that nail art is performed on well-prepared nails. No drawing will hide the “shaggy” cuticle and irregular shape, bumps and depressions on the surface.
Manicure with large stones and rhinestones
Volumetric 3D manicure with large stones and cone rhinestones is very popular in the summer months and in December, when New Year's evening designs are in demand. In autumn and most of winter, fingers decorated with stones and rhinestones are not relevant due to the fact that they simply do not allow you to put on gloves freely. A large stone can get caught on clothing and come off. But in the warm spring and summer, when our hands are “free,” such a luxurious design comes in very handy. Pebbles with an interesting cut shimmer very beautifully in the rays of the sun and attract attention.
The photo shows a luxurious red manicure inlaid with stones of different sizes. Additionally, you can use broths and pieces of tear-off foil.
In order for such a design to please its owner for a long time, the stones on the nails need to be well strengthened.
How to securely secure large stones?
- You can lay the pebbles on a mixture consisting of fine acrylic powder and a rubber base. A fairly large drop of such material should be placed in the center of the nail and the largest pebbles should be placed on it. Next, the first part of the composition must be dried well.
- Then, with a brush dipped in a thick base, we outline large stones and frame them with small rhinestones, pixie crystals, bouillons or pieces of tear-off foil. Let's dry it. To ensure that everything is firmly fixed, we additionally outline each pebble with a top coat.
In this simple and quick way you can lay out a beautiful composition of rhinestones, stones and any additional metal decor. Inlay with voluminous stones is most often done on long nails, because on short nails it can look bulky.
How to create a wet nail effect with gel polish
The effect of wet nails in a gel polish manicure is done by rubbing. First you need to cover them with a flower bed or camouflage base. And after drying and removing the sticky layer, rub shiny powder into the surface. It should be finely ground, and the color should be chosen according to your taste, since the shade of the gel polish will be hidden under it. After using the rub, fan the nails with a fan brush and cover them with a glossy top coat. The final step is its polymerization.
There is a second coating option, but “wet” nails will look as if there is dew on them. Manicure is performed in the usual way. After applying the flower bed, you can use a matte top coat over the entire surface. But then they put droplets on it with a glossy finish. And they send their hand into the lamp again.
Master class on drawing
For wet design you will need:
- base and top coat;
- primer;
- several colors or shades of varnish - depending on the preferred pattern;
- brushes or needles;
- UV lamp for drying.
Before you start implementing the manicure, the handles need to be put in order: push back the cuticle at the base of the nails, correct the edge of the plates and sand the nail plate of each nail. Apply degreaser, primer and let dry. Then apply a base coat of gel polish. Cover the nail plate with two or three layers of varnish, each of which needs to be dried in a lamp.
Apply an additional layer of gel of an adjacent shade and begin painting.
A step-by-step guide to painting flowers on each nail:
- Use a thin brush to pick up the color and apply a drop on your nails - this is the basis for each flower. Gradually draw out each layer.
- The varnish can spread over the nail and mix with the base, resulting in a good combination and volume.
- After drawing out the lines, you need to wait 10-20 seconds and dry your nails under a UV lamp.
- Seal the image with topcoat and remove the sticky layer.
Beige design
This design is good for daily wear and business wear. To work, you need pastel shades of gel polishes, for example, beige and brown. Step by step execution:
- After thoroughly preparing your nails, you need to cover them with a base and dry them under a lamp.
- Paint the nail on the little finger and thumb with beige varnish, and the rest with brown.
- Make an unobtrusive pattern on the nameless one. On the wet brown tone, place white gel polish pointwise on top and bottom, and then stretch it from one and the other edge to the center.
- Cover the painting with finish and dry.
Is there a gel polish that spreads with a pattern?
Gel polish, which spreads in a pattern, is available from many manufacturers; the following products are known to provide the desired result:
- Nika Nagel gel polishes;
- MiiS base, which can be combined with flower beds from any company;
- flower beds and Rosalind solvent;
- BlueSky Flower Gel gel polishes;
- Gellaktic Mystic compositions.
These media may be called watercolors. Or there is no such definition on the bottle, but there is information about the spreading effect.
Drawing on a wet surface will make your nail design unique even with a simple image. This technique is accessible to beginners; it does not require additional funds or costs. And an unsuccessful picture can be corrected with a clean brush or erased with a napkin soaked in a degreaser.
What kind of design can you create?
More recently, the most common designs for wet gel polish were floral designs . Today, trends have changed and the number of options has increased dramatically.
Flowers of various shapes, sizes and colors, as well as graphic patterns, abstractions, haze of various interpretations, butterflies and other patterns continue to be very popular .
—>
Marble manicure, which is very popular today, is also performed using this technique. You can design circles with penumbra, a cobweb entangling your nails, or create a shell effect, as well as use a marine theme . All this is available using this technology.