Henna and clay varnish
We will need: henna, olive oil and white clay.
Combine oil and clay in proportions 2:1. Add henna and give the mixture a smooth consistency. Apply the substance to your nails. The layer should be thick enough. We wait about 15 minutes. We wipe the nails with a cotton swab. Polish the nail plate with a piece of silk.
If you apply this coating to your nails two or three times a week, they will soon become healthier and acquire a natural shine.
How to make hairspray with Aloe Vera for strong hair hold
Are you into Victorian curls? Then this hairspray is for you! The viscous aloe vera gel will make your hair stay in any style. Since it is rich in beneficial minerals and vitamins, it will also make your hair shinier. This nourishing hairspray recipe also uses rose water, which will add shine to your hair and leave it smelling amazing. You can also use any essential oil of your choice to add fragrance. We used lavender essential oil as it also promotes a healthy scalp.
You will need:
- Aloe vera gel (for fixation) - 2 tablespoons
- Rose water (adds shine) - 1 tablespoon
- Filtered water - 2 tablespoons
- Lavender essential oil (for aroma) - 2 to 4 drops
Making Hairspray:
Mix aloe vera, rose water and filtered water. Add lavender essential oil and mix well. Mix the ingredients well.
Pour into a dark spray bottle and use as hairspray. Simply spray the solution onto damp hair before styling your hair.
The shelf life of this homemade hairspray is comparatively short due to the presence of fresh aloe vera gel. It can be used within 2-3 weeks if stored in the refrigerator.
Alkane and beeswax
Alkane roots have a healing and coloring effect. Therefore, it is quite acceptable to make varnish out of it.
Heat 3 tablespoons of olive oil and 0.5 tablespoons of alkane root in a water bath. Let it brew for 5 minutes.
Strain through a strainer and place in a steam bath. Add a little beeswax and wait until it melts.
Add a few drops of vitamin E there. Mix thoroughly and cool. Gently apply the mixture with a brush to the nail plate.
Should I use nail polishes, how to choose the right one
A real lady cannot imagine life without makeup. Manicure has become a mandatory addition to image and style. This article will help you analyze in detail the composition of hair dye.
When choosing a varnish, you need to pay attention to the composition of its components. You shouldn’t succumb to fleeting weakness just because you like the color:
- Pay attention to the content of essential oils, they will fill you with vitamins and strengthen your nails.
- Poor quality products can destroy the nail plate, making it brittle and split.
- When painting your nails, ventilate the room; evaporating substances can harm your health.
- To protect your nails from chemicals, use a base coat.
Cost – 350 rub.
Eyeshadow based varnish
With this technology you will get a unique coating with a unique shade.
Pour a small amount of shadows of any color onto a piece of paper. Grind them with a teaspoon. And pour it into a bottle with clear varnish.
Mix everything thoroughly with a toothpick. After applying this nail polish, you should wait at least 15 minutes for complete drying.
When making decorative varnish coatings, of course, you cannot do without using store-bought varnish. The Internet offers a lot of options on how to get a unique design product from an ordinary transparent varnish.
And among this variety there is one interesting idea - how to make a transparent reflective varnish with your own hands. Read more about this.
What is it made of?
Is nail polish harmful? Let's figure it out. The basic framework is divided into six main components:
- Coloring pigment substances;
- Natural or chemical resins;
- Solvent;
- Plasticizers;
- Stabilizing additives;
- Polymer UV additives.
- Coloring pigment substances are the main component of any varnish. It is allowed to include only substances approved for use that do not cause harm to health. The color range can be obtained from a mixture of different shades of pigments added in a strictly defined percentage. The pigments themselves can be either solid or liquid natural or chemical substances.
What sophin nail polish is can be understood by reading the contents of this article.
How to properly apply hard nail polish Impress manicure is indicated in the article.
What horsepower nail polish is is indicated here: https://soinpeau.ru/kosmetika/dekorativnaya/lak/dlya-nogtej-loshadinaya-sila.html
For those who want to study the instructions for Lotseryl nail polish, you should follow the link to the article to study.
If the pigment has a solid consistency, it is first crushed to a very fine fraction. To give a shiny or pearlescent effect, the varnish includes glitter particles or crushed pearls, metal particles or polymer additives, and natural mica ground in a grinder. Silica is also necessarily present, which prevents the deposition of coloring pigments to the bottom of the bottle. To stabilize the color range, some compositions use citric acid, a natural product of plant origin.
- Resins. With the help of this component, all heterogeneous varnish particles are combined into one homogeneous composition. Typically, resins are made by polymerizing other chemical or natural ingredients through a chemical process. Nail polish uses a film-forming or adhesive resin that can smooth the nail plate, make it shiny and firmly fix the coating. A small amount of epoxy resin, adipic acid, trimethyl anhydride, copolymer and tosilamide is used - a type of formaldehyde resin that is gentle on the nail plate. But there is another type of formaldehyde resin that is used to strengthen nails, and it can provoke changes in the plate.
- Solvents . This component is responsible for the smooth consistency of the varnish coating; usually its composition should be identical to the resin used in the varnish. Everyone knows the pungent smell when the varnish dries - this is the solvent evaporating, but the process itself should take place evenly over the entire surface of the nail. If evaporation is poor, the painted surface can be smeared, which is why fast-evaporating compounds are used in varnishes. These include butyl acetate or isopropyl alcohols, although since 2007, these substances have been banned. Probably many have encountered dried varnish - the solvent in it has completely evaporated, and a solvent can be used to bring it back to its previous condition. Recent developments in varnish compositions include dimethicone, a substance of chemical origin that helps varnish dry quickly. TIP: Do not dilute dried nail polish with nail polish remover - it contains acetone, which can ruin the base composition of the polish.
- Plasticizer . This is a softening component that converts resins into a plastic composition, so that the surface of the nail is evenly covered with varnish. This is a molecular combination of substances that converts components into stretchable substances that are continuously active. After adding a plasticizer, the resin in the varnish becomes more viscous and can resist chipping. A typical plasticizer these days is camphor, a crystalline substance that successfully copes with cracking of the entire coating.
- Stabilizing additives are necessary for the uniform distribution of pigment in the varnish - they distribute the smallest particles throughout the bottle, without pigment sedimentation.
- Polymer UV additives necessary to protect the color scheme from exposure to ultraviolet rays and color fading in the sun.
- Some cheap varnishes may contain pure formaldehyde , which helps quickly remove varnish residue from the surface of the nail. But numerous studies have proven that it has a very negative effect on overall health, can cause a widespread allergic reaction, and even respiratory arrest. Before choosing a safe varnish for yourself, carefully study the label - the presence of formaldehyde in it is undesirable in order to avoid negative consequences.
- Polymer components . I usually add two types of polymer components to varnish compositions - tosilamide (obtained from the synthesis of formaldehyde resins) and nitrocellulose. Combining into a single substance, they create a glossy surface for the coating, while at the same time hardening, they create a powerful film cover for the nail. One can say one thing about nitrocellulose - it is an excellent protective film former, giving the surface a glossy appearance, but when completely dry it can become quite brittle. The ingredient is obtained by chemically treating natural fibers with nitric or sulfuric acid.
The video shows the composition of nail polish:
Tisilamide (from formaldehyde resin) is also a film coating former, and when combined with nitrocellulose molecules, it eliminates the increased fragility of the composition and increases resistance to external influences.
IMPORTANT! Formaldehyde resin and formaldehyde itself are different chemical components; the gas fraction of formaldehyde is no longer used for the production of varnishes, but it can be found in the composition of strengthening components for coating nail plates.
But what reviews exist about Orly nail polish can be found in this article.
But what Vinylux Faberlic nail polish is, you can understand if you read the contents of this article.
But what reviews exist about Sally Hansen nail polish can be found in this article.
But you can see a photo of mirror nail polish in this article.
For those who want to know how to dilute thickened nail polish, you can understand from the contents of the article.
Luminescent clear varnish
First of all, you need a phosphor - a special pigment that accumulates and reflects light. You also need a clear varnish and a solvent for it.
Pour varnish into a glass or ceramic container. Add a phosphor. The amount of pigment will determine the brightness of the glow.
The recommended dose is 30%. For better distribution of the phosphor, add a little varnish solvent to the mixture.
Mix the mass thoroughly, bringing it to homogeneity. The resulting transparent enamel will glow beautifully in the dark.
Gel polish at home
Many people are interested in how to make gel polish with their own hands. Unfortunately this is not possible. After all, gel polish is made using a special technology, using certain chemical components.
It contains a photoinitiator, due to which the coating reacts to ultraviolet radiation. There is also a film former responsible for strength.
It also contains diluents, various pigments and fillers. It is very difficult to get all this, and even more so to make gel polish at home.
Some, however, advise mixing regular polish with gel. But such a mixture will not give the desired result at all.
"Neon" manicure
A homemade way to make a glowing manicure. You need to take acrylic fluorescent paint and paint your nails over clear or white polish. If the varnish is colored, then the acrylic paint should be the same color. A clear varnish can be applied over the top for protection.
IMPORTANT TO KNOW: Which gel polish lasts best on nails, reviews from experts and useful tips
You can use gel pens with the same effect.
Varnish storage
If you wish, you can make many original and effective varnishes yourself. But then a logical question arises - where to store them?
Of course, in an organizer, which you also make yourself. Want to learn how to make your own nail polish organizer? From ordinary cardboard. This simple job won't take much time.
Cut out a couple of pieces from cardboard and glue them perpendicularly. This will be the bottom of the product. Next, we cut the partitions and shelves and glue them to the base in tiers.
It would be interesting to add drawers in the empty space under the upper tiers. We decorate the organizer to your liking. The easiest and fastest way to decorate is to cover the organizer with gift wrapping.
