TOP 13 sterilizers for manicure instruments: rating of the best + recommendations for selection

If you are a beginner nail technician, then you have already asked yourself the question: which sterilizer is best for manicure tools. Sterilization is the key to the safety of the client’s health, an indicator of high service and care for those who come to you for beautiful nails. Just the ability to create a neat and fashionable coating of nail plates is not an indicator of a good master. And it is the sterilizer that will allow you to achieve the proper level of safety for the instrument used during nail manipulation. Which one is better to buy, let’s look into this material, because there are several varieties of these devices, and there are a lot of models on the market.

The best sterilizers for manicure instruments: TOP-13

Photo	Name	Rating	Price
Ultraviolet sterilizer
#1		Sunuv S2	⭐ 4.9 / 5 4 - votes	Find out the price
#2		Germix TNL	⭐ 4.85 / 5 1 - voice	Find out the price
#3		JessNail Sterilizer JN-9007	⭐ 4.8 / 5 4 - votes	Find out the price
Ultrasonic sterilizer or washer-sterilizer
#1	Read also: Secrets of using acrylic powder to strengthen nails	Washer-sterilizer VGT-2000	⭐ 4.95 / 5 2 - votes	Find out the price
#2		ruNail, ultrasonic device for instruments	⭐ 4.85 / 5 2 - votes	Find out the price
#3		Sanitas SUR 42	⭐ 4.8 / 5 1 - voice	Find out the price
Glasperlene and quartz sterilizers
#1		IRISK 898	⭐ 4.95 / 5 5 — votes	Find out the price
#2		Planet Nails MACROSTOP 139-10305	⭐ 4.95 / 5 3 - votes	Find out the price
#3		Tools Sterilizer	⭐ 4.9 / 5 1 - voice	Find out the price
#4		Glasperlene sterilizer TNL	⭐ 4.85 / 5 2 - votes	Find out the price
Dry heat sterilizers
#1		Sanitizing Box WX-12C	⭐ 4.95 / 5 17 — votes	Find out the price
#2		Lily KH-360B	⭐ 4.9 / 5 9 — votes	Find out the price
#3		Sanitizing Box CH-360T	⭐ 4.85 / 5 16 — votes	Find out the price

Which sterilizer did you choose or recommend?

Take the survey

This rating presents 13 popular models of sterilizers of various types, which have been preferred by manicurists for several years. Each of them is good in its own way. For convenience, the rating is divided into several categories depending on the type of devices described.

Please note that the editors of our site do not cooperate with commercial companies that sell equipment. And the rating is based on an analysis of reviews and user ratings that they post on popular review sites. This rating does not encourage you to buy the recommended models, it only gives an idea of which of them are currently popular and in demand, and you should not take it as a direct guide to buying any option.

TNL Professional (South Korea) for 100 types of tools

Despite the compact plastic body, the product is capable of high-quality disinfection of many small manicure, pedicure, and cosmetic devices made of metal at high temperatures. Moreover, the process itself takes just a few seconds. The product does not require special care, with the exception of replacing the balls after they lose their useful working properties. The protected electrical cord is firmly attached to the device, which ensures the safety of the sterilizer.

Advantages:

easy-to-use housing;
heating up to 280 degrees;
working flask made of heat-resistant metal;
quartz glass balls of equal size;
disinfection occurs within 30 seconds;
long permanent cord;
average cost 1500 rub.

Flaws:

You cannot place a large number of instruments in the flask at the same time.

Ultraviolet sterilizer

No. 3 – JessNail Sterilizer JN-9007

JessNail Sterilizer JN-9007
This sterilizer is one of the most practical and user-friendly models among UV sterilizers. It is used for the last stage of tool processing. That is, before placing them in this box, you need to hold them in special solutions or process them in dry heat.

Ultraviolet rays have a bactericidal effect and protect instruments from microorganisms. Thus, by storing instruments inside, you don’t have to worry about their sterility. The device power is 8 W, works from the network. Compact dimensions - 44*34*19 cm. The disinfection process lasts approximately 40 minutes.

The device is unpretentious in operation, convenient to use, but collects quite a few reviews on the Internet. However, there are very few openly negative ones.

pros

small sizes
sufficient power
comfortable in using
Suitable for various instruments
reliable

Minuses

not found

Prices for JessNail Sterilizer JN-9007

JessNail Sterilizer JN-9007

No. 2 – Germix TNL

Germix TNL
This sterilizer is chosen by many manicurists for its unpretentiousness and low cost. Recommended for purchase in pedicure and manicure salons, as well as for hairdressers and hairdressers working at home. It is used to store already processed tools.

A 9 W lamp with bactericidal properties is installed inside the device. It is due to this that the disinfection of instruments occurs: that is, previously processed items will not be contaminated during storage until a new client arrives. Thus, at any time, the tools are ready to work with a person.

You can store instruments inside the sterilizer for up to a week. The equipment has appropriate safety certificates. The lamp does not emit ozone, and it also has an auto-shut-off function as soon as the chamber is opened - this helps protect the technician’s eyes.

pros

small sizes
low cost
convenient use
does not emit ozone
Automatic lamp shutdown when opening the lid
beautiful view

Minuses

used for storing cleaned instruments rather than for processing them

Reviews of the Germix TNL sterilizer

No. 1 - Sunuv S2

Sunuv S2
This rectangular sterilizer is an indispensable assistant for nail technicians and hairdressers. Small, reliable and efficient, it deserves to be in every professional's possession. In just 3 minutes, this small box destroys almost 100% of microorganisms, over the entire surface of the instruments placed in it.

The device is used for disinfecting and processing various metal tools, and is also used for storing them. The box is absolutely sterile and allows you to protect any materials and objects contained in it from microorganisms.

Inside the sterilizer there are 8 powerful diodes of 8 W each. There is also a mirror bottom, a built-in battery, and a light filter to protect the master from UV rays. The silicone stand prevents the device from sliding.

As buyers note, the device is convenient to use and easy to transport if necessary. Cleaning up dirt is also not difficult. Weight - only 410 g.

pros

convenient to transport
it's inexpensive
energy saving function
8 diodes 8 W each
built-in battery
silicone stand

Minuses

not detected

Prices for the Sunuv S2 sterilizer

Sterilizer Sunuv S2

Why are sterilizers needed in salons?

Manicure is not only a very complex process that requires care, but also a responsible one. Failure to comply with basic safety and hygiene rules can result in quite unpleasant consequences. For example, after completing the necessary procedures, all the master’s tools must be thoroughly cleaned.

Material processing consists of the following stages:

Disinfection is a set of measures aimed at destroying microbes that cause various diseases.
Pre-sterilization cleaning – mechanical cleaning of the surfaces of accessories from plaque, protein deposits, and chemicals.
Sterilization is a procedure that involves the complete destruction of pathogenic bacteria, fungi and spores that cause inflammation and skin infections.

Disinfect instruments simultaneously with mechanical cleaning. First, treat the materials with a soft napkin or cloth soaked in a special disinfectant. Then the instruments are immersed in the solution for a certain time, thoroughly dried and sterilized in sterilizing devices.

Ultrasonic sterilizer or washer-sterilizer

No. 3 – Instrument sterilizer Sanitas SUR 42

Sanitas SUR 42
This sterilizer is used not only for cleaning all kinds of instruments used in the beauty industry, but also for jewelry and dentures. In a word, it is suitable for everything that requires careful and attentive care, as well as compliance with all rules of sterility and safety.

The device has a small display and a timer showing operating time. Backlight - LCD. The reservoir has a volume of 550 ml. The power of the device is 50 W. The dimensions are quite compact and are 21*13*20 cm.

As buyers note, the device makes virtually no noise and looks beautiful. But, unfortunately, it is not always durable. However, its price is reasonable, and for a novice master or for use at home, this sterilizer is an excellent option.

pros

low cost
small sizes
powerful
beautiful appearance
silent operation

Minuses

not durable

Prices for Sanitas SUR 42 sterilizer

Sterilizer Sanitas SUR 42

Reviews of the Sanitas SUR 42 sterilizer

No. 2 – ruNail, ultrasonic device for instruments

ruNail, ultrasonic device for instruments
A sterilizer that is suitable for manicurists, hairdressers, and for home use. The bowl is larger than the previous version, which means the device is capable of processing a larger number of items at once.

This device is used to treat instruments using ultrasonic waves, which have a high enough frequency to combat contaminants. For ease of use there is a timer and a small digital display. Power consumption - 35 W. The frequency of the ultrasound wave is 40 thousand Hz. The volume of the bowl is 750 ml. The dimensions are small - 20*17*15 cm. Moreover, the tool processing time is only 15 minutes. The weight is a little more than a kilogram, but the device is still easy to transport if necessary.

pros

compact dimensions
convenient use
big bowl
high frequency ultrasound wave
quick cleaning

Minuses

not detected

Prices for ruNail sterilizer

ruNail, ultrasonic device for instruments

No. 1 – Washer-sterilizer VGT-2000

Washer-sterilizer VGT-2000
This device copes well with dirt even in the most inaccessible places. He will complete the task assigned to him without any problems.

The device is used by nail technicians and hairdressers who work with metal tools. But it can also be used for processing jewelry, dentures, optical devices, and silverware. The sterilizer has a power of 35 W, a timer that shows how much time is left until the end of the procedure. The container is made of steel and is not afraid of corrosion. The ultrasonic frequency is 40 thousand Hz, and it is enough to cope with various contaminants. The container operates for 180 seconds and then turns off itself, but the operating time can be increased manually. Bowl volume - 600 ml.

pros

Suitable for cleaning various items
not afraid of corrosion
high quality cleaning
timer
sufficient volumes

Minuses

not detected

Prices for washer-sterilizer VGT-2000

Washer-sterilizer VGT-2000

Macrostop Plus for elegant manicure and pedicure

This model is often chosen for home use by owners of private manicure and pedicure salons. Quartz beads placed in the working chamber retain heat for a long time, so the time for preparing tools, even with a flow of clients, remains insignificant. A special feature of the model is automatic support of the desired temperature regime.

Advantages:

working container made of wear-resistant stainless steel;
increased body strength;
perforated plastic cover supports air exchange;
electronic temperature control;
fast working cycle (20 – 30 seconds);
instruments are not deformed during disinfection;
The glasperlene balls included in the set are replaced every 10 - 12 months.

Flaws:

the maximum sterilization temperature is only 200 degrees, which is not enough to destroy some bacteria and viruses;
cost from 2000 rub.

Glasperlene and quartz sterilizers

No. 4 – Glasperlene sterilizer TNL

Glasperlene sterilizer TNL
A device powered by quartz beads, suitable for processing various instruments made of metal. A compact tabletop option that is perfect for a manicurist.

This device works like this: tools for processing are placed in a flask. Inside the container there are already special glass balls heated to 165-200 degrees. Due to the high temperature, various parasites and microorganisms die, and in just 10-20 seconds of operation of the device. The model comes with the required number of balls, which need to be changed regularly (about once a year). The device power is 55 W, frequency is about 60 Hz.

Users appreciate this sterilizer for its compact size and ease of use. This is an ideal option for home use.

pros

suitable for home use
high processing temperature
small sizes
fast tool processing speed
convenient option

Minuses

not detected

Prices for glasperlene sterilizer TNL

Glasperlene sterilizer TNL

No. 3 - Tools Sterilizer

Tools Sterilizer
This is a professional sterilizer, which is often purchased by experienced manicurists. It is considered highly effective and perfectly prepares tools for further use.

Inside the plastic case is a glass made of heat-resistant material, filled with special balls. A spiral heater allows you to heat them to a certain temperature - up to 250 degrees. It is due to the high heat that the instrument is sterilized. Just a few seconds are enough to achieve the desired level of processing and safety of items.

As users write, the device is small in size and easy to use. The processing period does not exceed one minute. The balls retain heat for a long time, and you can quickly prepare the device for the next use after a short time. By the way, complete heating of the device lasts only 12 minutes.

pros

professional option
quick heating
high heating temperature
reliability
the balls keep warm for a long time

Minuses

not detected

Prices for Tools Sterilizer

Tools Sterilizer

No. 2 – Planet Nails MACROSTOP 139-10305

Planet Nails MACROSTOP 139-10305
This device has a wide range of applications and is suitable for both manicurists and hairdressers for processing metal tools. A reliable and durable option that does its job perfectly.

Warming up the device's 120 ml bowl to 250 degrees. Balls for filling the model are included. Due to its small dimensions, it can be installed directly on the desktop, making it easier to use and faster. It is enough to lower the items into the sterilizer for just 15-20 seconds, and they are ready for further work. Device power - 75 W. The main disadvantage is that it is made in China, which scares off potential buyers. But in reality, the model is quite tenacious and performs its functions well.

pros

small sizes
heating up to 250 degrees
good quality
fast tool processing

Minuses

not detected

Prices for sterilizer Planet Nails MACROSTOP 139-10305

Planet Nails MACROSTOP 139-10305

Reviews of the sterilizer Planet Nails MACROSTOP 139-10305

No. 1 - IRISK 898

IRISK 898
This is a quartz-type device that will help you quickly process scissors, files, and various tools used by manicurists in their work. An ideal option for craftsmen working at home.

Processing, unlike glasperlene, occurs by illuminating the objects to be sterilized with a quartz lamp. The device is mobile and compact, takes up very little work space, and is suitable for use at home.

The only disadvantages include the small capacity of the model. Otherwise, it’s an excellent option, with child protection, an auto-shutoff timer, and a reasonable price.

pros

small sizes
inexpensive
child protection
suitable for home use
auto shutdown
no need to pour balls

Minuses

small volumes

Prices for the IRISK 898 sterilizer

IRISK 898

Steam sterilizers

Steam sterilizers can be called:

hot steam sterilizer;
wet sterilizer;
autoclave.

According to GOST 27437-87, devices of this class are called “Steam Sterilizer”. Steam sterilizers (the most common name is autoclaves) use hot steam under pressure (0.8–3.5 bar) for sterilization. In this case, pathogens are destroyed at lower temperatures (110–135 °C).

Unlike dry heaters, autoclaves do not damage instruments and provide a shorter sterilization cycle. The steam sterilization method is the most desirable due to its versatility (you can sterilize any instruments, both packaged and unpacked; you can also sterilize rubber, plastic, and textile products). Steam sterilization is now the world's most common and preferred method of eliminating the risk of infection from contaminated instruments, recommended to health care workers by the World Health Organization (WHO) and the Center for Disease Control.

Autoclaves are divided into those with a pre-vacuum phase and a vacuum drying phase and those without a pre-vacuum phase (but they may have a vacuum drying). They perform the same functions: sterilization of materials and instruments, but the sterilization work cycle itself occurs technologically differently.

The European standard prEN 13060/1-4 divides autoclaves into three classes according to the descending line of requirements for them: “B”, “S” and “N”.

Class “B” autoclaves have the function of creating a preliminary vacuum and the function of vacuum drying at the end of the sterilization process. They can sterilize any type of medical instruments and materials: solid, hollow, porous, individually or double-packed of any type.

The function of creating a pre-vacuum in pulse mode is necessary to solve the following problem. Due to the fact that air cavities in sterilized objects can serve as a thermal insulator, steam treatment cannot always ensure complete sterilization of the instrument. Microorganisms are destroyed only upon contact with hot steam, and if contaminated air remains in the lumens of instruments or tips, then sterility will not be ensured. The pre-vacuum phase preceding the sterilization phase, or the vacuum cycle, makes it possible to remove contaminated air not only directly from the sterilizer chamber, but also from all cavities of the instrument being sterilized, ensuring the subsequent entry of hot steam into them.

Class B autoclaves meet the highest sterilization standards found in large clinical autoclaves. In such devices, sterilization of any instrument, linen and materials, with or without packaging, is allowed.

Class “S” autoclaves do not have a pre-vacuum phase, but they do have vacuum drying. Such machines are suitable for processing solid, smooth (unfolded) instruments, porous or wrapped materials, with or without packaging. They are more attractive in cost and are used in cases where the use of class “B” autoclaves is not required to sterilize instruments.

Class “S” autoclaves have lower power and some restrictions in the field of application. For example, they cannot sterilize some complex instruments with many internal cavities or items in multi-layer packaging.

Class “N” autoclaves are used to sterilize only unpackaged items without voids or crevices, all-metal instruments loaded directly into the autoclave chamber. Non-vacuum autoclaves are suitable for processing solid, smooth (unrolled) instruments and loose woven materials. Class “N” autoclaves are recommended for sterilization of simple solid products/instruments.

Dry heat sterilizers

No. 3 – Sanitizing Box CH-360T

Sanitizing Box CH-360T
Sterilizer designed to process three sets of manicure tools at once. A convenient, efficient device with all the necessary functions.

The operating time of the device is up to 60 minutes, the duration of treatment depends on the type, level of contamination and size of the instruments being immersed. The heating temperature can be adjusted within 0-220 degrees. A sound signal will indicate that the device has completed processing. The model also has a timer and a light indicating the operating mode.

The inside of the dryer is made of steel and has a removable container in which tools are stored and processed. Chamber volume - 1.8 liters. Device dimensions 31*14*18 cm.

pros

small sizes
thermostat
timer
high efficiency
sufficient chamber volume
low cost

Minuses

not detected

Prices for the Sanitizing Box CH-360T sterilizer

Sanitizing Box CH-360T

No. 2 - Lily KH-360B

Lily KH-360B
This tendon is a frequent “worker” in clinics and beauty salons. It does an excellent job of disinfecting tools without reducing their service life.

Inside the container is a stainless steel container, which is where sterilization takes place. The device can simultaneously accommodate several sets of tools. There is a removable container in which processed items are stored. The model is equipped with a display, which makes it very convenient to control the heating level and sterilization period. It is easy to set the desired heating level within 0-250 degrees. The timer can be set for up to 90 minutes.

Users note that this dryer looks beautiful and neat, has good build quality and lasts a long time. One drawback is that the device does not indicate that it has completed the sterilization cycle.

pros

reliable
high quality
suitable for home and salon
heating range up to 250 degrees
there is a display

Minuses

no end signal

Prices for the Lily KH-360B sterilizer

Lily KH-360B

No. 1 – Sanitizing Box WX-12C

Sanitizing Box WX-12C
An infrared-type dry-heat sterilizer that does its job perfectly.

The device is a small cabinet containing the latest IR heaters. The power of each of them is 300 W. You can heat the dry heat to a temperature of 250 degrees (there is a regulator that allows you to adjust the temperature) in literally a matter of minutes - 2-4 minutes. The device has a completely metal body and heat-resistant glass. The set includes two tool trays, which is very convenient. Heating of the container is fast and efficient. There is no negative effect on the tools; their service life is not reduced. Processing time for products without packaging is 30 minutes, even with heating and cooling. The volume of the chamber inside is large and equal to 10 liters.

Users note that the device is easy to use, convenient and effective. But the craft bags in which the tools are packaged can burn at high temperatures.

pros

large volumes
heating range up to 250 degrees
two trays included
IR heating
convenient control
fast tool processing

Minuses

Kraft bags burn

Prices for the Sanitizing Box WX-12C sterilizer

Sanitizing Box WX-12C

Reviews of the Sanitizing Box WX-12C sterilizer

Air sterilizers

Air sterilizers can be called:

dry air sterilizer;
sterilization cabinet;
dry heat cabinet;
tendon.

According to GOST 27437-87, devices of this class are called “Air sterilizer”. Air sterilizers (the most common name is dry heat) use dry hot air for sterilization. The device itself resembles an oven familiar to our eyes. Sterilization takes place in a special chamber into which hot air is pumped using a fan. For sterilization, the temperature is usually set to 180 °C, which is maintained for an hour. The full operating cycle of a dry heater usually takes 3 hours: 1 hour heating, 1 hour temperature treatment, 1 hour cooling in the chamber.

The quality of sterilization using the air method depends on the uniform distribution of hot air in the sterilization chamber, which is achieved by correctly loading the sterilizer. Products are loaded in such quantities that allow free air supply to the product being sterilized. Products are sterilized wrapped in sterilization packaging materials.

Hot air sterilization is only suitable for simple instruments made entirely of metal. In addition, it should be remembered: hot air itself is a rather aggressive environment, which inevitably affects the service life of the tool.

Pros of dry heat:

much cheaper than autoclaves.

Disadvantages of dry heat:

there is a danger of damage to sterilized objects due to high temperature;
Sterilizes only simple instruments;
a fairly long sterilization cycle (at least 60 minutes);
Plastic products cannot be processed.

Why do you need a sterilizer for manicure instruments?

Equipment for disinfecting manicure instruments is an important element of the furnishings of any salon, as well as a home studio. No master can do without a device that ensures the sterile cleanliness of objects used when working with a client. We are not talking about the processing of disposable materials - only metal or plastic instruments such as tweezers, scissors, cuticle trimming tools, and so on are subject to sterilization. A clean instrument is the guarantee that no diseases will be transmitted from one client to another, and that no foreign infection will be introduced from the outside.

Manicure instruments must be sterilized

Attention! Having a sterilizer is not only about taking care of the client, first and foremost. This is also an additional plus to the reputation of the master, which allows him to gain the trust of potential visitors.

The task of any sterilizer is to clean and disinfect instruments used when working with clients. The equipment allows you to get rid of bacteria and viruses that accidentally fall on metal surfaces.

Sterilization takes place in several stages.

Removal of surface base dirt, epithelium, blood or grease particles by cleaning instruments with wipes.
Treating instruments with liquid antiseptics and alcohol-based compounds.
Treatment in a sterilizer under high temperatures or various rays and waves.

On a note! The first two stages can be combined and performed simultaneously. This depends on the type of solution used.

By the way, sterilization can be electrical or chemical. Accordingly, sterilizers can also be electrical or chemical based on their operating principle.

Table. Types of sterilizers.

Type	Description
Electric	In this case, various types of radiation and waves are used to disinfect objects. For example, this could be IR, UV, ultrasound and other options for physical influence. Often such sterilizers are installed in salons, clinics, and also by high-level craftsmen.
Chemical	In this case, the cleaning of instruments occurs through the use of various chemicals - special solutions, compositions, and so on. Most often, this type of sterilization is used at home.

In order to clean the instrument as much as possible and make it safe for other clients, it is recommended to use several processing options at once. Only in this case can we talk about absolute sterilization and cleanliness of objects used in work.

Sterilizer “Ferroplast” 10 – 5th place

Ferroplast is a Russian company specializing in the production of medical equipment. The Ferroplast dryer is designed for sterilization of medical and manicure instruments, as well as other products that can withstand heat up to 200 degrees.

Functions:

Drying tools;
Synchronization of reports on completed cycles with a computer;
Delayed start.

Device characteristics:

Useful chamber volume – 10 l;
Dimensions – 345*430*450 mm.

The set includes 5 shelves that can be used simultaneously and ensure maximum loading of the device. Sukhorzhar Ferroplat-10 can operate continuously for 16 hours, after which a break of 8 hours is required. The same manufacturer has a model with a chamber volume of 5 liters, however, the price difference between these models is insignificant, so it is better to choose a device with a larger volume.

The device has a registration certificate and can be used in beauty salons, hairdressers and beauty salons and clinics.

How does a manicure sterilizer work: types of tools

Sterilizers, in addition to the options mentioned above, can be different. Moreover, how the instrument is cleaned depends on what type of device it is and how it works. In any case, the entire surface of any object placed in the device is processed. It is worth getting acquainted with all the options for sterilizers that are now sold in stores.

Ultrasonic bath-sterilizer for manicure instruments VGT-2000

Ultraviolet sterilizer

An ultraviolet sterilizer, as the name implies, affects objects placed in it with UV rays. Everyone knows about their antiseptic properties. UV rays can quickly and effectively kill most pathogenic microorganisms. But they must reach the entire surface of the instruments for the treatment to be as effective as possible. And it is recommended to turn them over during the procedure using sterile tweezers, which causes some inconvenience.

Germix SD-9001 A - ultraviolet sterilizer

The main disadvantage of a UV device is the processing time. To achieve the proper level of disinfection, it will take at least 20 minutes to keep objects inside it. Moreover, in most cases, ultraviolet sterilizers are used precisely as devices for storing instruments, and not so much for processing them. As a rule, after chemical cleaning, items are placed for additional processing and storage in a UV sterilizer.

Important! UV rays cannot destroy AIDS and hepatitis viruses. So you still need additional processing of the instrument when using such a sterilizer.

Dry ovens and autoclaves

Dry heat is perhaps the most effective sterilizer option that can be used to process manicure tools. In this case, the objects placed in the device are exposed to high temperature, that is, a thermal effect occurs. The maximum temperature inside the tendon varies from 200 to 250 degrees. This level is enough to destroy all parasites and viruses.

But not every tool can withstand such high-temperature treatment. Only all-metal objects will not deteriorate during such sterilization.

Dry-heat cabinet for sterilization of manicure instruments (Sukhozhar) CH 360 T

During processing, all tools should be placed on special grids or in special so-called craft bags. The latter have protection from heat, but can still burn at very high temperatures. Processing inside the tendon lasts about half an hour, but in some cases the tool will have to be kept inside longer.

On a note! Some dry heaters have a cooling function. Instruments from such devices can be removed immediately after the sterilization cycle and used immediately without waiting for them to cool.

An autoclave is a device similar to a dry heater, but has large dimensions and exposes the instrument to hot steam. So only metal variants can be processed in it, as in dry heat. At home, an autoclave is rarely used due to its large size.

Quartz and glasperlene sterilizers

A ball or glasperlene sterilizer is a device filled with balls made of quartz. It may also be called quartz, but other types of devices can also be quartz.

This is a convenient device in the shape of a flask, which makes it possible to thoroughly warm up the tool being processed. The balls inside the sterilizer can heat up to a temperature of about 250 degrees without harm to themselves. The outside of the case is plastic, and inside, as a rule, there is a metal flask that can withstand high temperatures. This option does not take up much space and is quite economical, since it does not consume a lot of energy. It is convenient to use at home, but such sterilizers are also sometimes used in salons - albeit in small ones.

Glasperlene sterilizer for manicure instruments

This sterilizer cleans the surface of instruments quite well. And very quickly. It’s enough to just lower the devices inside the device for half a minute, and you’re done. Also, this version of the sterilizer is relatively inexpensive and is accessible to a novice master.

The downside is that only the working part of the tool is processed. That is, the handles and the top of any device still remain untreated. Another disadvantage is the dulling of the sharp parts of the instruments. The balls inside the sterilizer need to be replaced with new ones approximately once a year, as they lose their antiseptic abilities. Also, before using this sterilizer, you need to warm it up, which takes about 30 minutes on average, but depends on the chosen model.

On a note! The SES recognized glasperlene sterilizers as capable of effectively and quickly eliminating all microorganisms from the surface of instruments.

Ultrasonic models

Such sterilizers, as the name implies, operate on the basis of ultrasonic waves. They are also called sinks, because special liquid compounds are used as filler in the sterilizer chamber to help fight germs and viruses. During operation, microbubbles are formed inside such a device, which, when bursting, remove parasites and contaminants from the surface of the objects being cleaned.

Ultrasonic washer SD-200

Small, compact and efficient, these sterilizers are in great demand. They are ideal for cleaning manicure tools both at home and in the salon. Moreover, they are suitable for disinfecting plastic products, since they do not use high-temperature technologies. The main disadvantage of such a device is the significantly high cost compared to some other options, as well as the need to purchase disinfectant compounds.

Important! Liquid solutions in such devices are powerless against a number of viruses, and this also needs to be taken into account.

Air sterilizer GP – 20 MO – 3rd place

A dry heat sterilizer from the Kasimovsky plant was created to speed up the sterilization procedure for surgical instruments and medical devices. Good quality performance makes it suitable for use in a nail salon. It differs from the GP-10 model in its chamber capacity, which can accommodate up to 10 sets packed in craft bags.

Functional:

Digital display;
Ability to save up to 10 programs into the device memory;
Cooling;
Display;
Equipped with overheat protection function.

Characteristics:

Material: stainless steel
Temperature conditions: from 50 to 200 degrees;
Heating to 180 degrees – no more than 35 minutes.
Overall dimensions - 626x450x415 mm
Internal: 392x225x280 mm
Volume: 20 l

Sukhozhar GP-20 has a registration certificate from the Ministry of Health of the Russian Federation, as well as all certificates of conformity. Recommended for use in high-traffic salons.

The GP-20 MO sterilizer is registered in the State Register of Medical Devices of Roszdravnadzor.

Instructions for sterilizer GP-20 MO

Chemical sterilization of manicure instruments: rules according to SanPiN

How to choose a sterilizer for manicure instruments

We have reviewed and studied basic information about all sterilizer options. But which one should you buy for a home or salon device?

The most popular are ultrasonic and UV devices, as they allow you to process absolutely any instruments, are compact and easy to use. But in terms of efficiency, dry heat and glasperlene options are recognized as the best. They treat instruments with high temperatures and destroy not only bacteria, but also viruses.

If the flow of clients is large, then the master uses a lot of tools. This means that the volume and size of the sterilizer are also important to consider when choosing a suitable model. There are those that can only hold one set, and there are those that can accommodate several at once. Moreover, it is important to take into account that the instruments to be cleaned cannot be placed on top of each other inside the sterilizer - they must be cleaned over the entire surface, without overlapping each other, otherwise there will be no proper result.

During sterilization, instruments must be neatly laid out inside the device.

The speed of disinfection usually depends on the power of the devices. The more powerful the device, the faster it cleans the surface being treated.

In short, when choosing a sterilizer, you need to consider the following parameters:

desired level of cleaning of devices;
cleaning speed;
difficulty of use;
power;
duration of cleaning;
dimensions;
the material from which the tools used are made;
budget;
workmanship;
manufacturer;
customer flow.

These are the main parameters that are worth paying attention to. But design is a secondary point.

Another important parameter is the conditions in which the equipment will be used. So, for example, for a home studio you can take a modest sterilizer. And if we talk about a studio or beauty salon, then it is better to take several options of sterilizers at once and carry out the highest quality processing of instruments using several equipment options at once. In this case, it will be possible to achieve maximum sterility.

The best UV sterilizers

Ultraviolet sterilizers are the largest in size among other types. At the same time, they can process a large number of tools at a time. Such devices are perfect for large beauty salons. An important feature of such sterilizers is that they do not have a destructive effect on instruments. Plus, you can use a variety of materials here (for example, wooden sticks, files with a plastic tip, etc.). The main disadvantage is the very long processing time. Below are the best UV devices according to experts.

Manufacturers

And finally, we’ll tell you about several popular manufacturers, sterilizers from which are often used by craftsmen. You can confidently trust the products of these companies and not worry about your health and the health of your customers.

DonFeel produces practical, convenient, functional devices aimed at use in salons, not home studios. This means that we can talk about the professional purpose of sterilizers and their high capacities. The sizes of the models are also quite large, and almost each of them can accommodate a large number of tools at once. As for the price, the devices of this company are at an average level. High quality materials are used in production.
TNL Professional is a company from Korea that produces a lot of everything for nail technicians, including sterilizers. They are suitable for home and salon use, effective and reliable. Moreover, the price of the equipment is more than affordable - the company is suitable for a novice master with a limited budget. The company strictly monitors product quality and produces reliable and unpretentious models.
ruNail is one of the most famous manufacturers of equipment for manicurists. This is a Russian company that mainly produces ultrasonic sterilizers with simple and convenient controls.
Jessnail is a company that has been on the market for 15 years. She focuses on beauty salons, but home craftsmen also use her products. The company produces some of the most reliable options for disinfection equipment.

Sanitizing Box, Dry Heat Cabinet WX-12C - 9th place

Unlike other models, this dry heater is infrared. Instead of classic stainless steel heating elements, the device is equipped with infrared heating elements with a high heating rate. The average preheating time for the inner chamber is 1-2 minutes. The device is manufactured in China and has a declaration of conformity. Approved for use in beauty salons.