Milling cutters for home manicure: TOP 5 best, selection criteria

A girl at any age wants to look well-groomed. There is often not enough time or money to visit a salon. The rhythm of a modern lady is so active that there is no time for self-care. Many people try to maintain the beauty of their legs at home. To ensure that the procedure does not take much time, but is effective, you can buy a special device - a pedicure machine. It greatly simplifies this task because it helps to quickly straighten the nail, remove hangnails and dead skin.

This device can be seen in many beauty salons, but not every girl knows that it can be used at home independently.

Basics

The pedicure machine helps you take care of your feet and toenails without the need for scissors or clippers. Thus making the procedure safe.

It consists of several parts:

1. The basis is a handle.
2. A motor that is built inside.
3. Speed ​​adjustment in the form of a slider
4. Cord or batteries.

The package must include a set of attachments. Milling cutters are designed for a specific operation - removing cuticles, removing rough skin and removing old calluses. Expensive models have a small vacuum cleaner that helps keep the area around you clean and free of dust.

After turning on the device, it begins to make rotational movements, thanks to which dry skin and cuticle are removed. The number of revolutions depends on the specific model - from 5000 to 60000 per minute.

Simple rules for using the device

Before you start using a newly purchased device for the first time, you must read the instructions or watch a training video. Recommendations in Russian should be on or inside the box. Although such a device does not require long training, you need to know simple rules when using it for the first time.

To simply remove the cuticle, it would be better to treat it with a remover that will make it soft. To begin with, it is better to use a diamond attachment at a low speed. The sensations should not be painful and the skin should not become red. If this has already happened, it means the nozzle or speed is not selected correctly. You should not spend a long time in the same place. After use, apply oil to the cuticle to soften the skin.

Apply near the cuticle slowly and evenly. In case of damage, it is better to stop the procedure and repeat only after a few days. The first time may be difficult, but everything comes with experience.

After removing the cuticle, you should change the attachment and polish the nail. To do this, you don’t need to bring the cutter close, just move along the surface and don’t linger.

To remove dry skin on the heels and calluses, you need to use a rubber base. If there are cracks, then a needle-shaped cutter will do, but you need to use it very carefully.

Operating principle and design of the manicure machine

A manicure machine is essentially a retrained drill machine, only very compact and designed for more pleasant procedures. Using this device, you can easily and quickly remove rough skin on your fingers and give shape and shine to the nail plate.

The device itself consists of several main parts:

1. Cases-handles;

2. Built-in motor;

3. Rotation speed controller;

4. Battery pack or network cable.

Each manicure device comes with various attachments: for processing cuticles, polishing nails and removing calluses. Professional and advanced models may also have a built-in vacuum cleaner that sucks in the sawdust during operation, and a foot pedal for adjusting the speed.

When you turn on the device, the motor causes the abrasive attachment to rotate at high speeds, and it, in turn, files off dead skin and areas of nails that require correction. Depending on the power of the built-in engine, the number of revolutions of the cutter can vary from 5 to 60 thousand rpm.

Kinds

For home use

A large number of girls do not do a hardware pedicure at home, because the process takes quite a lot of time. But not all of them know that a small device will help make your nails well-groomed in 20-30 minutes. You no longer need to waste time on travel and the procedure itself in the salon.

A beginner who has never done a pedicure on his own should pay attention to models with low speed. Optimally - up to 20,000. With such devices you cannot damage the skin or overdo it.

You can take it with you on a trip and maintain the beauty of your legs yourself. The arsenal includes several attachments that help polish the nail. This is how you get the perfect pedicure at home.

Simple devices operate on batteries or a network cable.

Another positive aspect is its light weight and comfortable shape. So the procedure gives only pleasant sensations.

Professional

The second type is professional. Their difference is in their higher price and power from 60 Watts and above. This option is used in expensive salons by craftsmen who are previously trained. The kit may include a small vacuum cleaner and often has a function - protection against unwanted overheating. For a beginner who does not have basic skills, this is not the best option because they take up a lot of space and are not suitable for home use.

The main advantages are durability and reliability.

The kit includes several attachments. They are enough for a large number of clients.

Tips for choosing

Before making their first purchase, girls often don’t know what to look for. If you make a purchase in a store, a consultant can help. But when choosing on the Internet, making a choice on your own is not so easy.

1. Power and rotation speed. These two parameters are the main ones, so you should definitely pay attention to them. If a girl wants to use the device only for herself, then a device with 20-30 thousand revolutions and up to 60 W is suitable. For professionals, you can look at models up to 40 thousand revolutions and up to 100 W.
2. Assembly, materials and handle shape. The device should fit comfortably in your hand and not slip. The parts must be made of durable material, otherwise the device will only last for a short period of time.
3. Weight. If it is too heavy, your hand will get tired quickly. The optimal weight for home use is up to 200 grams. Before purchasing, it is better to try holding the device in your hand.
4. Before purchasing, you should study the attachments that are included in the kit.
5. It would be better if the model had a collapsible handle, then you can change parts during use.

Before purchasing, you need to turn on the device and check its operation. A good device will vibrate a little, but not try to jump out of your hand. Nowadays there are a lot of Chinese analogues on sale, which may not do their job well.

Differences between an expensive router and a cheap one

For beginners, it may be completely incomprehensible why one model costs 1000 rubles, and another is 10 times more. What are their differences?

• The quality of the materials from which the machine is made.
• Number of functions that can be used.
• Nozzles Budget models often have low-quality cutters that will have to be purchased separately.
• Number of revolutions. In models up to 1000 rubles, it may not coincide with what is stated on the packaging. Cheaper models are often not designed to remove certain finishes, such as gel polish, but work well for pedicures.
• Life time.

Additional options

Before purchasing, you need to explore the additional capabilities of the pedicure machine.

1. Overheat protection is a feature that will help preserve the device for many years of operation.
2. Backlight. This option is rather useless, because it is better to do a pedicure in good lighting, and not when a small light bulb is on.
3. Availability of a vacuum cleaner. In such cases, the mobility of the device is lost, but this feature is very useful for use at home.
4. A convenient mode speed switch is an important feature that helps you get a pedicure for the thinnest nails. Often girls suffer from this problem on their legs.

Nozzles included

Even the most budget device comes with at least two attachments. Types of cutters and attachments:

1. The required attachment is a cuticle cutter. She delicately lifts it from the nail and removes it. When the procedure is carried out correctly, girls note that there is no discomfort, and the cuticle grows much more slowly.
2. Flat attachment for calluses and dry skin. It does the job much better than any penza or file.
3. A cone-shaped cutter, which is necessary to combat a problem such as an ingrown toenail.
4. A polishing cutter that gives your nails a well-groomed look and a healthy shine.
5. Cylinder-shaped cutters, which are necessary for thick nails. Used for pedicure.
6. The brush is the final step.

If necessary, attachments can be purchased separately.

Which manicure machine to choose

1. If you are a beginner and are purchasing a device for training or personal care, a simplified model for home use with a cutter speed of 20-25 thousand rpm and a set of ceramic attachments of no more than 7 pieces is suitable for you.

2. Girls who have experience in hardware manicure can safely purchase a more advanced home machine with a power of 60 W, producing about 35-40 thousand rpm. This device is already suitable not only for hand care, but also for pedicure.

3. Professionals working in the salon or at home will benefit from powerful devices (up to 100 W) capable of operating at a speed of about 40-60 thousand rpm. These models are equipped with all the necessary functions and come with a large number of good attachments of different hardness and shape.

Milling cutters

There are three types of material that can be used to make cutters.

1. Ceramic. This option is best considered for beginners who are just starting to work with this device. They gently remove the dead skin layer and are therefore safe. To determine the hardness, just look at the shade. Hard is black, medium is white, pink or blue are the softest. Such cutters are used to remove corns, cracks, cuticles, side ridges and the nail plate.
2. The second type is diamond. Such cutters are most often used for the free edge of the nail plate, as well as for removing cuticles and small calluses. Advantages: budget cost and durability. To determine the hardness, just look at the color: yellow, red, green - soft and medium, black - hard.
3. For natural nails or those that have been coated with acrylic, the third option for cutters is suitable - silicone.

Shellac removal scheme

If you carefully follow the step-by-step instructions, you can protect your nails from accidental damage by carefully removing the shellac from them.

The standard procedure takes about 40-50 minutes, but there is no need to rush so as not to harm the integrity of the nail plate.

To carefully remove the work, treat each hand separately:

1. Cut the cotton pads into two pieces crosswise.
2. Soak cotton wool in shellac remover and squeeze them out a little.
3. Apply the discs to the nail plate, minimally covering the periungual area so as not to accidentally damage its condition.
4. Wrap the tip of your finger with foil to secure the compress. You can replace the foil with special manicure caps or put them on top to increase the density of the lotion.
5. After 15-20 minutes, unwrap the foil and remove the compress.
6. Using a metal pusher or an orange stick, try to remove the decorative coating from the nail. If the shellac does not come off, restore the compress.
7. Completely remove the softened gel polish. This must be done carefully - do not scrape too much on the sensitive surface so as not to damage it.
8. Remove the remaining shellac and unevenness of the plate with a buff, polish the surface until smooth.

After completely treating the first hand, you can begin removing the manicure from the second. Be careful - use tools carefully to maintain the integrity of the nail bed.

The best manufacturers

When choosing a device, you should look at the company that manufactured it. You should not choose a manufacturer that is little known. Always read reviews from other users. In order to avoid unpleasant situations, we will consider reliable manufacturers who have been on the market for several years.

• POLARIS

A well-known company around the world that specializes in the development of small household appliances and utensils. The Swiss brand meets all the requirements, which is why it is in demand. For an affordable price, the client receives excellent quality and modern design.

• Scholl

The most famous brand. Every girl has heard about him. Although foot care equipment is not the cheapest on the market, it is appreciated by customers due to its durability and effectiveness.

• Rowenta

The brand has been on the market since 1909, so it has been able to win a large number of satisfied customers. Rowenta technology combines incredible technical capabilities, sophisticated design and long service life. It was created in order to make life easier for a large number of people.

• Vitek

The Russian brand appeared on the market back in 2000. Vitek can be classified as a budget category, but its equipment is not inferior in its properties to more expensive analogues.

• Podomaster

Podomaster is a company from Germany that specializes in creating high-quality devices for manicure and pedicure. The brand is in demand among a large number of craftsmen all over the world.

Which manicure machine is better?

After getting acquainted with the top ten equipment for manicure and pedicure and the evaluation criteria, choosing and buying one will be much easier. There will be no clear recommendations from Vyborexperta.ru, since everything is purely individual. But there are several leaders in terms of the advantages outlined in the review:

• Beurer MP64 is a portable manicure machine for beginners with smart LED lighting, high-quality attachments that are suitable for diabetics;
• Medisana MP 815 - an inexpensive manicure machine, a complete set for providing services, a reverse function and durable attachments;
• Strong 210/120 – high endurance, comfortable lightweight handle, fast rotation of the cutter, quiet operation without vibration;
• Brillian White – ergonomic case with display, two modes of operation, absence of noise and vibration;
• Marathon 3 Champion/H35LSP is a portable, stylish machine with good endurance, power, and different control methods.

It’s good if, before purchasing a product, you can evaluate which handle will fit comfortably in your hand, and also if you inspect the package, the integrity of each part, the strength of the structure and the correctness of the device in use.

Rating of the best pedicure devices

Budget

GA.MA GSP0803

The GA.MA GSP0803 device is ideally created for girls who want to get excellent results in a few minutes. The compact set is made in a beautiful pink shade, so every girl will like it. It is convenient to take it with you on a trip. The set includes a cone-shaped cutter for polishing and shaping nails, as well as for lifting and removing cuticles. The attachments are made of durable metal with sapphire coating, so they will last for many years. The kit is made in the form of a small box with a lid. The handle is conveniently shaped, so it does not slip in your hand while working. There is a convenient adjustment button.

The GA.MA GSP0803 works both from a battery - up to two hours, and from the mains.

GA.MA GSP0803

Advantages:

• Affordable price;
• Quality;
• There are several attachments included - 8 pieces.

Flaws:

• Not found.

Scarlett Vita Spa SC-MS95006

An excellent budget option for creating a pedicure at home is the Scarlett Vita Spa SC-MS95006. Girls celebrate its cute design, which has won the hearts of many.

The set includes 6 attachments with detailed descriptions and the pen itself. It comes in a beautiful pink box with a clear lid. There are 5 speeds that can be easily adjusted.

Weight is 200 grams, so it is suitable for travel.

The average price is 600-700 rubles.

Scarlett Vita Spa SC-MS95006

Advantages:

• Budget cost;
• Cute design;
• Several attachments;
• Backlight.

Flaws:

• Not suitable for cutting off gel polish.

Mid price category

Dykemann Nagel M11

The Dykemann Nagel M11 device is designed for manicure and pedicure. You can use it both at home and in the salon. High power of 65 W and speed of 30,000 rpm ensures fast nail care. 6 cutters included allow you to efficiently process nails, cuticles, side zones and remove calluses. The speed is adjusted smoothly using a mechanical switch. The operating parameters of the device are displayed on the display. The device is lightweight, so you can take it with you anywhere. It does not make noise or vibrate during operation. Overheating protection is also provided, so the device does not heat up during prolonged use.

Advantages:

• Acceptable price;
• Light weight;
• Good equipment.

• None.

Irisk JD-400

Ideal for both manicure and pedicure. The device consists of a handle with a nozzle and a small control unit. The cord is quite long - 2 meters, so it is convenient to use the device anywhere. A special stand helps to store the machine correctly while working.

There are 4 nozzles. This model was made in China, but this did not affect the durability of the device.

Irisk JD-400

Advantages:

• Affordable price;
• There is a fan;
• Clear controls;
• Two directions of rotation;
• Compactness;
• Adjustable rotation speed;
• Cord – 2 meters.

Flaws:

• The cutters that come with the kit are not of very good quality.

Strong 90N 102

The ideal device for creating a pedicure at home. This model has several attachments, replacing which takes 5-7 seconds.

The device operates from 110 to 220 V. It is worth noting that it operates silently

The device can work for 12-13 hours without any problems, so this option is suitable for professional nail workshops. In case of overload there is a protective shutdown function.

The kit includes stands for the tip, a pedal for starting with your foot and a kit for servicing the device. In cases of minor damage, you can fix them yourself.

Strong 90N 102

Advantages:

• Design;
• Durability;
• Quiet operation;
• Efficiency;
• Convenient speed adjustment;
• Can work for a long time without a break.

Flaws:

• Not found.

Premium class

Brilliant Black 30000 rpm

The unusual appearance attracts the attention of all girls. It refers not only to functional things, but also very stylish ones. The body is made in a beautiful black color.

The handle of the device weighs only 168 grams, so during operation the process brings only pleasant sensations. The controls are intuitive and no training is required to use it.

One of the important advantages is the quiet operation, although the device has a speed of up to 30 thousand revolutions per minute. The tip does not heat up.

Powered by network. Power – 65 W.

Brilliant Black 30000 rpm

Advantages:

• Stylish design;
• Quality of materials;
• Two directions of rotation;
• Weight – 168 grams;
• There is a stable stand;
• Comfortable handle;
• Quickly and painlessly cuts off dry skin;
• Ergonomics.

Flaws:

• Price.

Podomaster Classic 30000

The Podomaster device is made in Germany. This model differs from all others in the rating in that it belongs to professional equipment and is intended for use in a salon. Many craftsmen note durability and high-quality sound insulation.

The oval-shaped handle weighs less than 100 grams and is made of non-slip material.

The vacuum cleaner comes with an antibacterial bag, which needs to be changed once every six months. Replacing it takes only 7-10 seconds.

Power – 50 W. Rotation speed – 30 thousand revolutions per minute.

Podomaster Classic 30000

Advantages:

• Stylish design;
• Comfortable handle;
• High-quality assembly of materials;
• Weight;
• Simple controls;
• There is a vacuum cleaner;
• Display;
• Durability;
• Vacuum cleaner power – 350W.

Flaws:

• Price.

How the device works

A gel polish remover on Aliexpress will cost less than in a specialized store. But their operating principle is the same.

Manicures are also done using these units. Only for this procedure you will need other attachments.

When removing the used composition, the machine operates as follows: when the unit is turned on, the cutter begins to move at high speed; approaching the nail plate, she carefully removes the top layers of gel polish. In this case, the person does not even feel discomfort, as sometimes happens when performing the procedure manually.

Metal cutter for removing gel polish

Caring for the device

In order for the machine to serve for several years, you must follow simple operating rules:

1. You only need to wipe with a soft cloth that does not harm the body.
2. After each use, remove all dust.
3. It is better to clean the attachments with a plastic brush with soft bristles. Then rinse with water and put in a sterilizer.
4. The cutters must be stored in a closed case.

If you follow these recommendations, the pedicure machine will please its owner for more than 5 years. It depends on the manufacturer and the materials that were used. The average service life of the motor is 7 years. During this period, you will be able to save a good amount of money, because there will no longer be a need to visit foot spa treatments and spend it on something necessary.