Properties of glasperlene sterilizer and rating of the best

Properties

A glassperlene or ball sterilizer is a small device with glass beads inside. Processing occurs by heating the balls to a temperature of 160 to 250 degrees.

The name quartz ball sterilizer, which is the same as glasperlene, is often used. The fact is that the filler balls are made of quartz glass, which has high strength.

The device is used at the third and final stage of processing after pre-sterilization cleaning and disinfection, but is the most controversial sterilizer of all existing ones.

How and with what to disinfect, sterilize and clean manicure instruments

Important features of the ball sterilizer:

1. The device does not allow the instrument to be completely immersed in the environment of heated balls., which contradicts SanPiN 2.1.3.2630-10 “Sanitary and epidemiological requirements for organizations engaged in medical activities.” Only small objects, such as cutters, can be completely immersed, and then removed using tweezers. It is also prohibited to sterilize instruments with locks or internal channels in this device.

2. After treatment, the instrument is used immediately - it cannot be stored inside or outside the sterilizer after the end of the treatment cycle.
3. It is impossible to track the result of sterilization - if an indicator is placed in a tendon or autoclave, then this cannot be done with a glasperlene sterilizer, which means there is no guarantee that the treatment was successful.
   Sukhozhar - types, choice, use of a sterilizer
4. The model of glasperlene sterilizer used must have a certificate of conformity and have a registration certificate from Roszdravnadzor for use in the Russian Federation.
5. Rospotrebnadzor employees may regard the use of ball processing as a violation . If you still plan to purchase a device, contact the regional office of Rospotrebnadzor or Roszdravnadzor with a specific model and find out if it is possible to use it.

Caring for the device

To ensure that your ball sterilizer lasts as long as possible, maintenance and repair should only be carried out by specialists who know how to do it.

Care is as follows:

1. Every day, after finishing use, it is necessary to clean the surfaces.
2. If the cable going to the electrical network is damaged, it must be repaired immediately, but this must be done exclusively in a specialized technical support center.

Flaws

1. You will have to change the balls periodically - approximately once every 6-12 months.
2. Only the working part of the tool is processed, and the handles remain untouched.
3. The balls dull the tools.
4. Inability to control the results of sterilization.

In fact, a Glasperlene sterilizer, even if it has a registration certificate from the Ministry of Health, can only be used to sterilize cutters.

As you can see, both the pros and cons of the device are quite significant. Before purchasing a device, be sure to weigh all the pros and cons and be sure to consult the regional office of Rospotrebnadzor.

Application

Areas of application of glasperlene sterilizer. Who is it suitable for:

1. For those who plan to sterilize small instruments in it - primarily cutters;
2. For those who do manicures at home for themselves and relatives, that is, for personal needs . In this case, the risks of infection are minimal and the heated balls will be sufficient for processing;

Disinfection and pre-sterilization cleaning of manicure instruments: how to choose a disinfectant and prepare the solution correctly

Rating of dry heat sterilizers

Why do you need a sterilizer for manicure instruments?

Equipment for disinfecting manicure instruments is an important element of the furnishings of any salon, as well as a home studio. No master can do without a device that ensures the sterile cleanliness of objects used when working with a client. We are not talking about the processing of disposable materials - only metal or plastic instruments such as tweezers, scissors, cuticle trimming tools, and so on are subject to sterilization. A clean instrument is the guarantee that no diseases will be transmitted from one client to another, and that no foreign infection will be introduced from the outside.

Manicure instruments must be sterilized

Attention! Having a sterilizer is not only about taking care of the client, first and foremost. This is also an additional plus to the reputation of the master, which allows him to gain the trust of potential visitors.

The task of any sterilizer is to clean and disinfect instruments used when working with clients. The equipment allows you to get rid of bacteria and viruses that accidentally fall on metal surfaces.

Sterilization takes place in several stages.

1. Removal of surface base dirt, epithelium, blood or grease particles by cleaning instruments with wipes.
2. Treating instruments with liquid antiseptics and alcohol-based compounds.
3. Treatment in a sterilizer under high temperatures or various rays and waves.

On a note! The first two stages can be combined and performed simultaneously. This depends on the type of solution used.

By the way, sterilization can be electrical or chemical. Accordingly, sterilizers can also be electrical or chemical based on their operating principle.

Table. Types of sterilizers.

In order to clean the instrument as much as possible and make it safe for other clients, it is recommended to use several processing options at once. Only in this case can we talk about absolute sterilization and cleanliness of objects used in work.

How to choose

Glasperlene sterilizers are no different in their functionality - they are all equipped with a power button and indicator lights, but there are several criteria that you need to pay attention to when purchasing:

1. Heating temperature . This point especially applies to devices ordered from online sites like Aliexpres. Based on the results of tests carried out by customers, it was revealed that more than half of the received devices heat up to 140 degrees instead of the stated 250. In addition, they require at least 30 minutes to warm up to this mark, although the manufacturer writes about 10-15 minutes of preheating.
2. Hull strength. The design of the devices is almost identical, however, the material used for production is different. It is better if it is made of metal or durable plastic.

3. Availability of rubberized feet . Pay attention to the material of the legs. If they are rubberized, the device will not slide on the table surface.
4. Availability of a registration certificate from Roszdravnadzor. The document confirms the registration of the device in the state register of medical devices and allows its use on the territory of the Russian Federation. This is the first thing to ask the seller.

Operating principle of a glasperlene device

The specific operation of this equipment lies in the heating of special glasperlen balls, which are poured into the device’s container. As a result of exposure to high temperatures, the balls heat up and retain heat, producing sterilization. Thus, devices immersed in a container with hot balls, the temperature of which exceeds 100 degrees, are completely disinfected, after which they can be used again.

User manual

When using for the first time after purchase, be sure to read the instructions for the device.

Step-by-step use of glasperlene sterilizer:

1. When using for the first time, pour the balls into the device.
2. Connect to the mains.
3. Close the lid and press the power button.
4. Wait until the balls are completely heated. The time is indicated in the instructions for the device - most often it is 12-15 minutes. Once the temperature reaches the maximum, the indicator light will turn off or change color.
5. Open the lid and lower the tools so that they do not touch the bottom and walls. If the cutters are being sterilized, “sink” them into balls using tweezers. Scissors and nippers are immersed open so that the balls have access to the cutting parts.
6. Leave the tools for the time specified in the instructions for the device - from 5 to 40 seconds.
7. Use tools for their intended purpose immediately after removal.

Sterilization devices

Craftsmen welcomed the advent of ball autoclaves and UV devices with a bang. Many salons gave preference to a glasperlene sterilizer, since using ultraviolet devices only disinfection can be done, but they do not allow completely sterilizing manicure devices. UV devices work well against bacterial and fungal flora, but are unable to eliminate HIV or hepatitis.

To completely protect clients, masters must not only treat devices using a UV sterilizer, but also use additional high-temperature treatment of manicure instruments, having previously treated them with disinfectant solutions (for example, Alaminol).

Another disadvantage of the device is that for high-quality disinfection, it takes about an hour to process a large object on one side, after which it must be turned over and again wait the required time. To sterilize a small product, it takes less time - about forty minutes on both sides.

The use of UV devices cannot be completely abandoned, since only small objects made entirely of metal can be processed with a glasperlene sterilizer. This means that if the tool has a handle made of a different material, or is too large for a ball device, it cannot be processed with a ball autoclave. At the same time, the UV sterilizer disinfects all items without causing any damage to them.

Common Questions

How often to change beads in a Glasperlene sterilizer

Replacement is carried out once a year or as the balls deteriorate. A signal that the contents need to be changed is when the color of the balls changes from transparent to yellow or becomes cloudy.

How much do sterilizer balls cost?

The price directly depends on the manufacturer and packaging volume. On average, 300 gr. balls cost from 150 to 400 rubles.

How many balls should I put in the device?

For stable operation, it is required to fill the container at least 2/3 of the way, leaving at least 1.5 cm from the edge of the bowl.

Home Assistant Sterilizer XDQ-501 (China)

The compact model does not take up much space, has an ergonomic configuration and a modern design. Why waste time and money on visiting a manicure or pedicure salon? There is a similar device that can effectively disinfect small metal instruments in a matter of seconds. At the same time, the plastic case does not heat up, unlike quartz glass beads, which efficiently destroy pathogenic microorganisms.

Advantages:

• operating temperature reaches 250 degrees;
• speed of preparation of the necessary tools;
• the device consists of heat-resistant plastic and an aluminum flask placed in it;
• light indication of device readiness for operation;
• convenient power supply from the mains;
• quartz beads included;
• the working surfaces of the tools are not dull;
• cost from 1000 rub.

Flaws:

• no instructions in Russian;
• Only for small metal tools.

Rating of glasperlene sterilizers

Glasperlene sterilizers are practically the same from each other from a functional point of view, but may have different heating temperatures, appearance and prices.

TNL – 8th place

The body is made of high-strength plastic, which allows it to be used for a long time. Instrument sterilization time is 20 seconds:

• Production - Korea.
• Temperature – 200 degrees.
• The price of the device does not exceed 1000 rubles.

There is no registration certificate.

Tools sterilizer – 7th place

A budget device with a heating temperature of up to 250 degrees. The device takes 10-15 minutes to heat up.

Manufactured in China.

Advantages:

• low price - from 700 to 1200 rubles.

Among the shortcomings, most often the lid is not securely fastened. There is no registration certificate.

ABC IRISK – 6th place

The Russian-made device has a reasonable price - about 800 rubles. The body is made of durable plastic, and the flask is made of aluminum:

1. Production - Russia.
2. Temperature – up to 250 degrees.
3. Heating time to operational condition – 20 minutes.

Planet Nails, Macrostop – 5th place

The Chinese model Macrostop has a familiar design - a white plastic body and an aluminum bulb:

• The cost ranges from 2 to 2.5 thousand rubles.
• Heating to operating temperature – 20 minutes;

Advantages:

• sterilization time – 5-10 s.

There is no information on the registration certificate.

Tau Steril, Tau Quartz 500 – 4th place

The model from the Italian manufacturer heats up to 230 degrees and successfully copes with sterilization in 5-15 seconds:

1. The device comes with quartz glass balls..
2. Price – from 10 to 12 thousand rubles.

The Tau Quartz 500 model has a registration certificate from Roszdravnadzor, but it lists the device as a dry-heat sterilizer. In this regard, before purchasing, it is worth checking the possibility of using the device.

Ultratech SD-780 – 3rd place

The Ultratek SD-780 case is made of steel, is not susceptible to physical impact, and is durable. The filling balls provided in the kit are made of high-strength glass.

Temperature – 250 degrees.

Advantages:

1. A high-power heating element is used, which reduces heating time to 15 minutes.
2. Rubberized feet.
3. Automatic temperature maintenance during the working day.

Flaws:

• lack of a lid to close the flask . When left idle for a long time, dust settles on its surface.

The price for Ultratech ranges from 8 to 10 thousand rubles. , Russia.

Has a registration certificate from Roszdravnadzor.

OT12 – 2nd place

A sterilizer with a plastic body and an aluminum flask heats the balls to 290 degrees. Heating to operating temperature takes 10-15 minutes. Manufacturer of Silver Fox cosmetology equipment from Taiwan.

Advantages:

1. Automatic temperature maintenance system with light indication.
2. The temperature inside the device is displayed on the built-in screen.

Price – from 2.5 to 3.5 thousand rubles. There is no information on the registration certificate in the register.

The best sterilizers for manicure instruments: TOP-13

Which sterilizer did you choose or recommend?

Take the survey

This rating presents 13 popular models of sterilizers of various types, which have been preferred by manicurists for several years. Each of them is good in its own way. For convenience, the rating is divided into several categories depending on the type of devices described.

Please note that the editors of our site do not cooperate with commercial companies that sell equipment. And the rating is based on an analysis of reviews and user ratings that they post on popular review sites. This rating does not encourage you to buy the recommended models, it only gives an idea of ​​which of them are currently popular and in demand, and you should not take it as a direct guide to buying any option.