Pedicure machine: how to use?

Description of the tool

Considering that visually a pedicure tool is similar to a regular shaving machine, there is nothing in common between them and their functions are different. Pedicure machines are purchased to take care of your feet. Professionals call this process a trim pedicure. It is not suitable for people with diabetes.

For a high-quality medical pedicure, it is better to contact a specialist in this matter; it is not advisable to do it yourself. The machine consists of:

Sharp blades (gets rid of seals and calluses).
Sanding files.
The tool itself.

Unlike shaving machines, pedicure machines do not function like razors. It contains very sharp blades, so they need to carry out the procedure carefully and carefully. If you remove rough skin using a razor, this sometimes has a negative effect on your feet. The razor will leave deep cuts, resulting in infection and an inflammatory reaction. There is a possibility that a pedicure machine will damage your foot due to its sharp blade, so it is important to use the razor correctly.

Before you start trimming your skin with a pedicure machine, it is recommended to consult a dermatologist. It will reveal the presence of all kinds of foot lesions. To prevent the heels from becoming rougher, you need to use the machine over a long period of time. For a painless shave, before the procedure, the legs are steamed in hot water, due to this the skin will soften and it will be easier for the blade to capture only the roughest part. You can do it 3 or 4 times a month, then your feet will always be protected from damage and the likelihood of complications will decrease.

This manipulation should not be performed on people with deeply cracked feet because cutting off the dead, rough skin will damage the top layer of skin. If this fact is not scary and you still plan to treat your heels using a machine, keep in mind that in such a situation a superficial procedure is carried out with the application of special septic tanks. The movement of the blade comes from the place where the rough skin begins. Under no circumstances should you act from the middle of the heel.

When treating fingers, it is taken into account that calluses often form in the area of the thumb and little finger, so treatments are limited only to them. To finally get rid of dead cells, use the heel grinder, which is included in the kit.

Before buying a machine, you need to carefully study it and make sure that the blades are sharp, since dull ones will lead to negative consequences.

Expert's choice

Electric pedicure file Beurer MP55

Beurer MP55 Photo: Beurer MP55

Expert Aida Latypova chooses an electric file from a German manufacturer of beauty and health products. Lightweight, with an ergonomic and stylish design, the device will quickly tidy up the rough skin of the feet and get rid of dry calluses. And there is no need to steam the skin in advance.

The kit includes two replaceable rollers with different degrees of abrasiveness, and there is a special grater on the handle for removing rough calluses manually. It runs on a battery, and if you haven’t had time to charge it, and you need a pedicure urgently, you can connect the file to the mains and go ahead.

Additional perks: bright LED lighting, bag included.

Advantages and disadvantages

noticeable effect, powerful, light, not noisy

replacement rollers are not sold everywhere

Positive and negative sides

There are advantages and disadvantages to a trim pedicure, so before starting the procedure it is recommended to learn in detail about the possible consequences. Its positive aspects include:

Great results in a short period of time.
Removing a large layer of rough skin.
Safety and minimal risk of injury.
Long lasting effect after the procedure.
Minimal time costs.
Affordable cost of the machine.

However, the procedure also has disadvantages. But if you follow the rules, their manifestation will be prevented:

Possibility of injury to the skin layer.
Infection with infections in the form of fungus and others.
If you do not steam your legs first, you will not be able to achieve the effect.
Without moisturizing the skin with cream, the manipulation needs to be repeated after a short period of time, due to intensive restoration of cellular tissue.

Tips for choosing and review of popular brands

When choosing a pedicure scraper, it is recommended to purchase tools made of stainless steel from popular companies:

Titania machines are low-cost because their head is made of stainless steel and the handle is made of plastic. However, the machine is durable and, with proper care, will last a long time. It may not always effectively remove severely rough skin.
Staleks machines are made of stainless steel, the blades can easily be replaced with new ones.
The Patrisa Nail machine is suitable for removing dead skin during a pedicure. The company produces materials and tools for nail care at competitive prices.
The tool from Zauber is made entirely of stainless steel, and the blades are made of titanium. This ensures that they will not become dull or rust over time.
The Zinger machine is popular and has many positive reviews. The set includes 10 blades that can be easily changed (1 blade is enough to perform 3-4 procedures). Proper use guarantees good results.
Beter machine with stainless steel head and plastic handle.
Designed for professionals, the Olton machine requires multi-step processing, is of high quality and will last a long time.

When using tools from any company, you should remember that they do not eliminate the cause of corns, but they get rid of rough skin and after the procedure give a feeling of lightness in your feet.

Types of machines

Pedicures are classic (edged) and hardware. The first is characterized by the use of a scraper, and the second is a special milling cutter, which is used in beauty salons. The procedure is carried out at home using electric, roller, abrasive files, pumice or a manual machine.

Characteristics of electric machine

An electric foot scraper is used to thoroughly care for your feet. It has built-in safety blades that help painlessly remove dead skin. It is easy to use and suitable for treating heels yourself. Before carrying out the procedure with its help, it is not necessary to steam your heels; it is permissible to leave the skin of the heels in a dry state. After finishing the treatment of the feet, a rich or moisturizing cream is applied to them. This is necessary in order to fill the skin with nutrients and prevent its rapid death.

Do not use electric razors in the following cases:

For fungal infections on the feet.
For diabetes mellitus.
For deep cuts on the feet.

An electric machine can only be used to remove corns, calluses and keratinized areas of the skin. It is strictly forbidden to apply it to the soft skin of the heels or other parts of the body. Due to the use of a pedicure machine, severe irritation occurs on living areas of the skin.

It is highly recommended that you consult a professional in this matter before purchasing an electric razor. After examining the damaged area on the foot, he will determine whether this purchase makes sense or not.

Characteristics of the manual machine

The manual pedicure machine with blades is made from stainless steel, so it will last for a long period. If you use a regular pedicure scraper incorrectly, you can seriously injure yourself. But the effectiveness of cleansing problem areas of the skin with it is much greater than that of power machines. Since it can be disinfected with various means, this will reduce the possibility of bacterial infections.

First acquaintance with the machine

Among the powerful arsenal of a pedicure master, there are many tools. For hardware pedicure - your own, and for trimming - your own professional kits. For the latter type of manicure, using a machine is common. This item is minimally similar in appearance to its comrade of the same name - a razor, but they still have common components:

comfortable handle;
blade holder head (usually made of stainless steel);
blade (replaceable sharp nozzle).

This simple design is intended specifically for pedicures; the machine is not used on other parts of the body. The razor blade is replaceable, which allows you to easily change it and always use a sharp unit.

The working surface of the product (head with blade) is one-sided, that is, one side is curved so as to touch areas of the skin of the feet with problems and cut them off with the blade. The second side does not perform any functions.

Recommendations before use

Before you start using a pedicure machine, please read some points. First of all, the legs are steamed immediately before the procedure. This is done using foot baths. Oils and flavorings are added to them. If there are cracks, chamomile infusion or sage is added. Also, if there are very rough areas of skin, it is recommended to soften them with special foot creams before the procedure. This will reduce the likelihood of an injury or cut and improve the final outcome.

Machine selection

The pedicure machine consists of a handle, a blade and a head that holds it.

The machine can only be used to remove rough skin from the legs. It is not suitable for other purposes. It is allowed to perform pedicures with blades made of medical steel or stainless iron.

We invite you to get acquainted with the most popular companies producing pedicure machines:

Titania is a fairly cheap option as the handle is made of plastic and the head is stainless steel.

Despite their low cost, with proper care these machines last a very long time. Their only drawback is their inability to deal with very hardened areas.

Staleks is a company that produces professional pedicure machines, so their machines are of excellent quality.

The stainless steel used in production allows them to serve for many years. Dull blades are very easy to replace.

Beter is a European company that produces machines with plastic handles and a non-traditional shaped head.

Zauber - the handle and head of the machine from this company are made of stainless steel. The blades themselves are made of titanium steel, thanks to which they retain their sharpness for many years.

Olton - the company produces machines made of medical steel. They are used in salons by experienced craftsmen. Parts require longer and more careful processing, but the machine lasts a very long time.

The machines do not solve the problem, but they allow you to give your legs softness and a pleasant appearance.

Application procedure

How to use a pedicure machine? The procedure for treating the feet with a pedicure machine is carried out in stages. There is nothing complicated in this process, you just need to remember to be careful and sterile.

Steam your feet in a special bath for half an hour to improve the result.
The process is performed only with light and smooth movements, while the machine must be tilted.
Treat cracked heels with extreme caution. Move the pedicure machine along, so the wounds will remain in the same condition and will not increase.
Movements go from the edge to the center, and not vice versa.
If pain occurs, you need to stop the process immediately, otherwise cuts may appear.
After completing the procedure, unevenness and roughness are sanded using a file.
The feet are treated with oils and moisturizing creams.
After completing the manipulation, the legs are placed in heat. Insulated socks are suitable for this.

Don't expect great results after the first procedure, especially if your feet are in poor condition. To achieve satisfactory results, the treatment must be repeated regularly. If the process is not carried out carefully, healthy skin will be cut off, resulting in new calluses.

Causes of deterioration of heels and feet

Problems with the skin of the heels indicate a lack of vitamins. To improve the condition of the body, the dermatologist will prescribe a vitamin complex. Heels dry out due to incorrect or uncomfortable shoes. Also, many people forget that they need to moisturize their feet and do regular pedicure procedures, otherwise unpleasant moments will appear.

Do not neglect the rules of personal hygiene and it is better to minimize the wearing of synthetic tights and socks. Under such conditions, a favorable environment is created for the life of bacteria and their reproduction. Foot care procedures are carried out regularly, and it is better to replace synthetic items with natural materials.

Remember that if strange symptoms appear on your heels, it is better to immediately consult a dermatologist. He will assess the current situation and tell you the treatment plan. If there are any restrictions on the use of an electric razor, then it is better to abandon it. Do not overdo the pedicure using a regular machine, as this will damage the skin and cause inflammation.

Thanks to a thorough and careful manicure, your heels will be in a healthy condition and will not require the help of a doctor or additional treatment.

Reviews

There are many reviews regarding the use of pedicure machines. Reviews of pedicure machines vary.

Some reviews are negative. People claim that it is very easy to cut yourself with the machine, and after several procedures performed, other manipulations become very painful.

Nevertheless, an impressive part of the reviews are positive. Users find this to be a very convenient device for performing pedicure procedures at home.

The machine allows you not to waste time and money on visits to the salon. In addition, the procedure is quite easy to perform and the results are visible immediately.

The price of a pedicure machine depends on the company that produced them and ranges from 150-1200 rubles.

Instructions and recommendations

Complete removal of cracks with a pedicure machine cannot be achieved with one procedure. To obtain the desired result, only two or three sessions will help.

It is forbidden to get rid of all the rough skin the first time, as this will cause pain and injury.

When the foot care procedure is completed, the pedicure machine is disassembled, cleaned, disinfected or sterilized. The tool is assembled only after the parts have dried. This will prevent rust from appearing on the scrapers. Before each treatment, it is advisable to replace the old blade with a new one.