Magnet for gel polish: what is it, how to choose and use?

  • 1 How to use a magnet?
  • 2 How to do a manicure with magnetic polish
  • 3 What is it?
  • 4 Stages of applying varnish
  • 5 Secrets of magnetic manicure with gel polish 5.1 When is it time to remove a cat's eye?
  • 6 Preparing nails for manicure
  • 7 How to do a cat eye manicure
      7.1 Selecting materials
  • 7.2 How to make a cat eye with gel polish
  • 8 Secrets and tips
  • 9 Magnetic gel polishes cat eyes
  • 10 Recommendations
      10.1 How to keep your manicure longer
  • 11 Nail preparation
  • 12 Regarding the magnet
  • How to use a magnet?

    Using a magnet to create a volume effect on your nails is quite simple. Most often, the packaging in which the set or the accessory itself was sold contains detailed instructions. The main thing is to bring it to the nail correctly, without touching the gel polish, but also without holding it too far. The entire process of creating such a spectacular manicure includes the following steps.

    Nail preparation. Before applying the gel, you need to do a regular manicure: trim or push back the cuticle, trim the edge of the nail, treat the top layer with a buff so that the gel fits better on the surface of the nail plate. Apply a layer of base gel and bake it in a lamp.

    • Decor. If desired, you can decorate the magnetic gel polish with additional rhinestones, foil, lace, drawings and many other decorative elements. This is best done after baking the coating in ultraviolet light, but before removing the sticky layer. In this case, the pattern of metal particles will not be disturbed, and the element will be well fixed on the nail.
    • Finish coating. Apply a finishing coat to the finished manicure to secure the result for a longer period, bake it in a lamp and remove the sticky layer. Manicure is ready.

    On sale you can find a large number of magnets of various types.

    Most often they come in the form of thin plates of various shapes:

    • round;
    • rectangular;
    • polygonal.

    Such plates may contain only one magnet or be double-sided. Then each side gives the coating a certain pattern. In addition, they can be made in the form of volumetric cubes, washers, balls, and even in the form of pens or pencils. Unlike the large area of ​​a regular magnet, the magnetic tip of the pen is quite small. By moving it over the coating, you can draw any patterns made from metallic dust of gel polish.

    Many manufacturers claim that the brand of gel polish and magnetic accessory must be the same. In fact, the same magnet will work perfectly with all magnetic gels that can be found on the market. Moreover, the special accessory can be replaced with any magnet purchased in a store or obtained from dismantling old household appliances. Although they are not intended for creating patterns on nails.

    How to use it correctly

    The process of creating nail art using magnetic varnish is simple, but there are still some nuances. The main attention is paid to maintaining technological sequence.

    The preparatory stage includes:

    • removing old coating from nails;
    • degreasing the plate surface.

    The sequence of creating a manicure using a magnet:

    1. Apply base coat to prepared nails. This will help level the surface of the plate and protect it from the negative influence of coating components.
    2. After drying the base, apply a thin layer of magnetic varnish. The number of layers can be increased to two if the nail is visible.
    3. Without allowing the coating to dry, bring the magnet as close to the plate as possible to get a clear pattern. The distance is approximately 3 mm.
    4. After fixing for 10-15 seconds, remove the magnet and proceed to designing the next nail.

    To obtain the same pattern, you need to keep the magnet in its original position in relation to the nail. You can change the effect of nail art by changing the angle of the magnetic block.

    When using magnetic varnish, no fixative is required. The coating hardens well after air drying and lasts a long time thanks to the metal particles.

    In the process of creating a manicure, it is recommended to follow the advice of experienced masters.

    1. A magnet is sometimes installed in the body of a nail polish brush. This makes the application of the coating convenient.
    2. Different manufacturers have different manicure design technologies. It is recommended to start the procedure by studying the instructions.
    3. Experts do not recommend keeping varnishes near magnets due to the possible demagnetization of metal particles contained in the coating.
    4. Before applying the varnish, you should shake the bottle to mix the components. Otherwise, metal shavings, having settled to the bottom, will not fall on the nails. As a result, the desired drawing will not work.

    How to do a manicure with magnetic polish

    The industry currently produces both regular varnishes with a magnetic effect and gel ones. In both cases, the effect of the spatulas is identical, for this reason here we will talk in detail about how to use shellac.

    First of all, you need to prepare your nails:

    • old varnish is removed;
    • the edge of the plate is treated with a buff;
    • cuticles are cleaned.

    If an LED lamp is used, drying takes no more than half a minute. Ultraviolet will take exactly four times as long.

    The nail is treated with a base compound, and after it dries, a special varnish with metallic inclusions is applied. Then a magnetic device is brought to the plate exactly parallel to it. After a few seconds (15-30) it is removed. Do the same with each nail in turn. After this they should be dried.

    The procedure is repeated with the second layer.

    The result is secured with a topcoat, and after it has hardened, the nails are treated with a de-sticking liquid.

    Actually, this is the whole process. As you can see, it doesn’t take very much time, and in all cases, with proper care, it guarantees an excellent result.

    If you wish, you can additionally decorate your nail plates with rhinestones, both white and multi-colored. It would be better to place them according to the resulting pattern, so the effectiveness will noticeably increase.

    Options for beautiful magnetic designs

    Manufacturers of such polishes offer different types of magnets so that you can create a new stunning manicure every time. We invite you to familiarize yourself with the options for patterns that can be obtained using these magic magnets. Incredible, delightful metallic shimmers will not leave you indifferent. And after looking at examples of designs, you can immediately decide which type of magnets you will give your preference.

    Magnetic manicure is magnificent in itself, but if you wish, you can decorate it with rhinestones, sparkles or other decorative elements - it all depends on your imagination . To create this nail art you will need minimal skills, a magnetic spatula and a special varnish. With their help, you can do a stylish manicure at home every day. We invite you to once again familiarize yourself with the procedure for performing a magnetic manicure, and at the same time appreciate the variety of designs and their incredible beauty in the final video.

    What is it like?

    Magnetic varnish is a decorative coating that contains small metal particles. When exposed to a magnet, metal shavings move. The result is a drawing with a 3D effect. It’s not difficult to create nail art yourself. There is no need to acquire special skills.

    Using varnish with metal shavings, different designs are obtained. The result depends on the magnet, or more precisely on its shape. The principle of creating a manicure is practically no different from using a regular coating. Only immediately after applying it, you need to bring the magnetic block to the nail plate and hold it for a few seconds. No UV lamp is required for drying.

    In addition to magnetic varnishes, gel varnishes are produced that contain metal particles. This coating can only be dried with a UV lamp. Polymerization without it is impossible. They last longer than regular formulations.

    Varnish manufacturers offer magnetic varnishes in a wide range of colors. Among the popular ones this season: burgundy, silver, deep blue. Magnets are included and sold separately. For one polish, you can purchase several magnetic blocks and your nails will not look monotonous. Magnets have a specific pattern:

    • rays emanating from the center;
    • longitudinal stripes;
    • transverse lines;
    • waves, etc.

    The 3D effect can be appreciated by moving your hand. At different angles, the drawing takes on a new shade, shimmers, and blurs. The coating looks like natural stones, for example, tiger's eye, cat's eye.

    Subtleties of using a spatula

    A magnetic spatula is a very interesting tool that allows you to create incredibly beautiful designs. But there are some subtleties of its use that we want to tell you about.

    • The ease of use depends on the shape of the spatula. There are ordinary small magnets, they are not very convenient - with them there is a high probability of touching the freshly applied coating. Models with a long handle are considered the most convenient. Therefore, be sure to check the form before purchasing.
    • Pay attention to the following criterion - the spatula must be equipped with a special limiter designed so as not to touch the nail plate.
    • For the spatula to collect all the metal particles into a pattern, 15 to 30 seconds are enough, depending on the manufacturer. If you hold the spatula for less than the recommended time, you will end up with an unclear pattern. Therefore, take your time and maintain the required period of time.
    • If you want to add clarity to the design, then use black or any other dark color as a base before applying magnetic varnish. Then the new layer will be more saturated and bright.

    Follow these simple rules, use products from trusted manufacturers, and soon you will learn how to create a stunningly beautiful manicure with minimal effort and time.

    Stages of applying varnish

    This type of design can be done not only in the salon; it is also very easy to do at home. The main thing is to follow a few rules:

    1. Do a basic manicure. Use a nail file to give your nails the desired shape, and after a relaxing bath, push back and remove the cuticles. Sand the nail plate so that its surface becomes perfectly smooth; if this is not done, the design may turn out ugly, there is a possibility that it will not have a smooth surface, but with tubercles.
    2. Apply base coat to nail plate. It is advisable to do this in a thin layer, evenly distributing it over the entire nail. After this, dry in an ultraviolet lamp for about two minutes.
    3. Having completed the previous stage, you can directly apply the magnetic gel polish itself. Shake the bottle before use. This is done so that the metal particles from the bottom are evenly distributed throughout the entire volume. If you have a question about how to apply magnetic gel polish, then a wide and comfortable brush will come to the rescue. When you have painted the first layer, place a magnet close to the nail itself. The distance should be no more than five millimeters; hold it or move it in different directions until you get the desired pattern. Then dry it again in an ultraviolet lamp. If you don't really like the result, this procedure can be repeated.
    4. The last final step will be applying the topcoat. After this, use a special liquid to remove the sticky layer. It can be applied to a napkin.
    5. Treat your cuticles with an emollient and lubricate your hands with moisturizer.

    To ensure that the pattern on each nail is approximately the same, place the magnet on the same side. If it turns out that the drawing has shifted, then it can be easily corrected by bringing a magnet to it from the right side. A rich “Cat Eye” design with magnetic gel polish can be created by painting your nails black before applying, preferably a glossy shade. After this they will have a stunning view with an incredible shimmer. Depending on the consistency of the polish, the nail drying procedure differs. So, if it is too liquid, dry it separately. In this case, the drawing will not spread.

    The result will undoubtedly please you, because you should get a unique design that will only be on your nails.

    How else can you create the “Cat Eye” effect?

    This effect can be created not only with the help of a special gel polish. You can use cat eye pigments.

    This option helps to diversify the designs with gel polishes that you already have. With the help of pigment and a magnet, you can add a stunning effect to your manicure at any time and give your manicure a special twist.

    How to use pigment?

    To do this, you need to mix it with a small amount of gel polish, gel paint or top coat, and then apply it like a regular “Cat Eye” gel polish on the nail plate.

    Experienced masters apply the “Cat's Eye” pigment directly to the undried layer of gel polish on the nail plate, mix it with a thin brush, and then create the desired pattern with a magnet. This option saves time and allows you to combine several pigment options in different parts of the nail plate.

    Thanks to gel polishes and pigments with the “Cat Eye” effect and imagination, you get a manicure with an interesting design! Don't be afraid to experiment! Create unique patterns and show your individuality!

    Secrets of magnetic manicure with gel polish

    After completing the preliminary work and applying the main layers - primer, base, gel polish as a color base - you can begin to create magnetic patterns. What do you need to know?

    1. The magnet only works on liquid varnish. During the polymerization process, metal dust is rigidly fixed, and it is almost impossible to change the pattern. The time under the lamp is standard: under UV – 2-3 minutes, under LED – 30-60 seconds.
    2. One layer is enough. The second is needed to create the depth of a 3D effect or complex patterned design.
    3. The magnet should be kept at a distance of 3-5 mm from the surface of the nail plate.
    4. The pattern formation time is 5-10 seconds. There is no point in waiting 1-2 minutes to get a brighter decor.

    VIDEO INSTRUCTION

    This is basic information, and now some practical advice:

    • The best magnetic patterns are created on dark substrates, so as the first layer it is better to use gel polish in rich colors - black, dark blue, cherry.
    • The work should be carried out sequentially on each nail and immediately bake the finished design.
    • The matte top gives a cat eye manicure an exceptional look. The lack of gloss does not spoil the 3D effect, but makes it more interesting and expressive.
    • The speed of the magnet depends on the reaction of the gel polish. If the pattern is formed quickly, then the magnet must be moved in the same way. For “slow” varnishes, a sedate decoration mode is recommended.
    • Any mistake can be easily corrected before polymerization. To do this, you just need to move the magnet from the wrong position to the right one. The gel polish particles will move on their own.

    How to hold the cat eye gel polish magnet determines the type of design you want:

    • perpendicular to the surface of the nail - the pattern will spread out to the edges;
    • parallel to the nail plate - a bright, slightly blurred line will appear;
    • at the edge of the nail or base - an ombre effect will be created.

    By experimenting with the position and inclination of the blade, you can create original and effective decors. But if you want to achieve exclusivity in nail art, you will need to master a magnetic pen.

    A magnetic pen for gel polish is both a special tool for manicure and a children's assistant for drawing on a magnetic board. Accessories give the same effect, so you can use any of the options.

    Main advantages of the pen:

    • thin tip - for complex patterns in any direction, even small magnetic patterns will be manageable;
    • convenience - the magnet can be tilted in any direction, changing the intensity of magnetization and the depth of the decor.

    It is with the help of a pen that you can create the most complex trendy designs: kaleidoscopes, Galaxy Nails and others.

    When is it time to remove your cat's eye?

    "Cat's eye" - long-lasting manicure. It lasts well for up to 3-4 weeks, but still there comes a time when it needs to be removed.

    There is nothing difficult about this procedure. Despite its complex composition with metal particles, this shellac is removed in the same way as other similar products.

    The wizard has three options:

    1. cut with a hard nail file -100-180 grit;
    2. dissolve with remover in a “bath” made of foil or with clothespins;
    3. use a manicure machine and carbide cutters.

    After removal, you need to degrease the nail, shake off the fine dust, and you can again bring fresh manicure ideas to life with gel polish.

    Preparing nails for manicure

    Pre-prepare your nails. Make a hand bath based on salt, essential and natural oils or medicinal plants. Steam the skin for a quarter of an hour. Using an orange stylus, push the cuticle to the base of the nail, cut it off with thin nail scissors or tongs. You can also use a special liquid if you have it on hand. Next, give your nails the same length and shape, and file the free edge with a glass file. Ladies who have uneven nails should use a polishing buff. Give the surface a matte and rough finish, eliminating defects. Wipe your nails with nail polish remover without acetone or a special degreaser. After this, wait 10 minutes for the product to evaporate from the plate structure. Apply the first protective layer - the base for the varnish, and dry. If your nails are not naturally smooth, use a “smoothing” base (base). It will fill in the gaps, allowing you to apply the base coat as efficiently as possible.

    It is important to understand that the more thoroughly the preparation is carried out, the better the final result will be.

    Of course, the application of magnetic varnish differs from the technique of using other coatings. The procedure requires attention to detail, a steady hand and perseverance. You will spend more time, but the result is worth the effort and time.

    1. In a stagnant bottle, magnetized particles settle to the bottom of the bottle. Therefore, the tube needs to be turned over and rolled between your palms for 1-2 minutes. Do not shake the bottle under any circumstances, otherwise bubbles will form, which will ruin all your efforts.
    2. After preparing your nails, start applying the composition. Cover the plates one at a time, starting with the little finger. Remove the brush from the bottle and wipe off excess from the back. Place the brush in the middle of the nail, lightly push the polish towards the cuticle, drawing a semicircle.
    3. Next, go down to the base of the nail, do not allow the polish to flow onto the side cavities. Seal the tip of the nail by brushing along the edge. There is no need to apply several layers of varnish; one is enough. This is what distinguishes magnetic coating from all others.
    4. After applying the composition to the little finger, start creating the ornament. Don’t hesitate, the pattern is drawn exclusively on a fresh surface. Bring the magnet as close to the plate as possible, but do not touch the nail so as not to smear the polish.
    5. Keep the magnet strictly parallel, no need to twist or tilt it. Wait 60-80 seconds, then remove the accessory. You will see a beautiful pattern, after 3 seconds the saturation will partially go away.
    6. After treating your little finger, start applying polish to your ring finger. The technology is identical to the previous one. If you use a magnetic platform, your finger is placed on it. The exposure time remains the same 1-1.5 minutes. Remove the nail carefully so as not to smudge the polish.
    7. Magnetic coating does not require a final layer. For this reason, do not use a special dryer, top varnish, gloss, fixative, etc. Such compositions will make the drawing cloudy and dull, and all efforts will be in vain.
    8. If during the manicure process you accidentally smeared the polish and as a result it remained on your finger, act carefully. Soak a cotton swab or manicure pencil in liquid without acetone and remove excess. Manipulations are carried out strictly after the creation of the drawing.

    The technology of using magnetic nail polish is not difficult if you follow the step-by-step instructions. Prepare the cuticle and plate in advance, give your nails a shape. Roll the bottle of coating between your palms, then spread over the surface of the nail in one layer. Keep the magnet parallel to ensure an even pattern. Experiment with shades and create your ideal look.

    How to do a cat eye manicure

    You can make a “Cat Eye” with a magnet both in the salon and at home. If you decide on the second option, then first select the right materials, and only then get down to business. We will tell you which varnishes and magnets are of the highest quality, and then give instructions for use.

    We select materials

    Choosing the right Cat Eye polish so you can actually use it is extremely important. No one is safe from fakes and low-quality products

    Here we will talk about the brands that produce the best paints for this manicure.

    • This is an excellent quality gel polish. It is made in the USA. The product is able to distribute itself over the nail plate; the technician doesn’t even need to touch it up. There will be no bald spots left.
    • Bluesky Shellac. Despite the fact that this is a Chinese brand, it still produces quite high-quality products. This “Cat's Eye” shellac will last about three weeks. The manufacturer promises that the product will also protect nails from brittleness.
    • This is a German brand that has already been appreciated by many craftsmen and amateurs. Very durable gel polishes are produced under it. They apply evenly even in one layer. In addition, the color scheme is well thought out.
    • TNL Magnet. A good option for making a cat eye on your nails. The products from this South Korean brand are thick and well pigmented. They fit well with bases from other companies.

    The above gel polishes are best used, but not necessary. You can use something else, as long as you like it.

    It is best to buy varnish and magnet from the same manufacturer. This way they will fit together well, which will ensure the best effect.

    It is worth noting that the pattern you get depends only on the magnet. It is he who determines what will form on the gel polish: stripes or intricate stains.

    How to make a cat eye with gel polish

    At the very beginning, you should prepare your nails for the procedure. To do this, you need to follow standard measures:

    • Wash the hands;
    • shape the nail plates with a nail file;
    • remove or push back the cuticle;
    • degrease the surface of the nail.

    When all this is already done, you can get to work and apply the Cat's Eye shellac.

    Step 1

    Apply the base coat. This is a required step. This layer will even out the nail plate, smoothing out any unevenness that may be on it. In addition, this provides better adhesion to the varnish and increases the durability of the manicure.

    The base layer must be dried under ultraviolet light. This item is also required.

    Step 2

    Let's start painting. How to apply Cat's Eye gel polish correctly? To do this, shake off the bottle of product so that the metal particles are evenly distributed. You want them on your nails, not at the bottom of the bottle.

    After this you can paint your nails. Do this in one or two steps. The number of applications depends on the color you want to achieve and the thickness of the shellac.

    Dry the first layer (if there are two) under ultraviolet light.

    Step 3

    It's time to use the special tool. How to apply cat eyes with a magnet? We apply it while the gel polish is liquid. Place the device over the nail and hold for 15 seconds. Exposure of this duration will be enough for a pattern to form on the manicure.

    After the procedure, be sure to dry your nails under ultraviolet light.

    Step 4

    Use a top product. With its help you can fix the varnish and the design. This layer should also be dried.

    Step 5

    Finally, you need to remove the sticky part of the top product. This can be done using a degreaser.

    This is how you need to do a cat eye with gel polish. There is nothing complicated about the procedure.

    Secrets and tips

    A few more things to consider:

    1. Gel polishes with this effect are usually very dense. This makes it possible to apply in one layer, which will dry well and be sufficiently accentuated.
    2. To enhance the effect, magnetic gel polish can be painted in 2 layers, and it doesn’t matter so much whether you magnetize each layer or not.
    3. The design looks beautiful when the design is located on all nails in one area.
    4. It happens that the highlight is not located in the middle, but seems to have moved to the side (that is, it is not where we would like it to be). You just need to tilt the magnet in the desired direction and pull up the metal particles.
    5. It will be even more impressive if you add it with an image of a cat. Her eyes can be made of little green stones. It is better to paint a cat with acrylic black or white paint.

    A manicure with this effect looks good in a matte finish: apply a matte top coat to a glossy top and let it dry. But it suits the mood, since the matte version looks more restrained.

    Magnetic gel polishes cat eyes

    The peculiarity of varnish with the “cat's eye” effect lies in its density, depth and ability to change shades when light falls on the surface of the nail from different angles. In addition, under certain conditions, the varnish can last up to three weeks on the nail. It is applied in the same way as regular magnetic varnish, but there are some nuances:

    • if the pattern slides to the side, adjustments are made using a magnet;
    • expensive varnishes have a dense structure; applying them in one layer is sufficient; cheaper ones require repeated application;
    • when there is a desire to enhance the “cat’s eye” effect, before using magnetic varnish, apply a regular black, glossy coating, and then the main coating;
    • To prevent too liquid varnish from spreading over the surface of the nail, you need to dry each finger separately.

    In addition to magnets, you can purchase a magnetic pen. Its operating principle is the same as that of magnets, but it is used to make inscriptions or more subtle ornaments on the nails. In order for the varnish to last longer, it is necessary to carry out housework with gloves, for two days after application, try not to get hot water on your hands, and do not visit the sauna or bathhouse.

    What is a manicure using a magnet?

    A manicure using a magnet is created with a special gel polish that contains metal particles. If you apply a magnet to such a gel polish coating, the metal particles on the nail will collect, forming a pattern, a shiny shade that resembles a cat's eye.

    There are many shades of cat's eyes: green, yellow, lilac, blue and others; the cat's eye effect can be seen in the photo.

    Magnetic manicure is also called “cat eye”

    Recommendations

    Helpful tips will help you get the perfect manicure with Cat's Eye shellac just like in a salon.

    Secrets of creating a “precious” manicure:

    1. For good magnet performance, you need to choose shellac with a liquid texture, where metal dust moves easily. Polymerization firmly fixes the result, which cannot be corrected. Before drying, you can easily correct any mistake by simply moving the magnet in the desired direction.
    2. Drying time in an LED lamp is 30-60 seconds, and in an ultraviolet lamp it is 2-3 minutes.
    3. For simple designs, one coat is enough, but a double coat is necessary when creating complex designs and 3D effects.

    If a highlight has shifted, this can be corrected by bringing a magnet to it and “pulling” it to the desired location. To obtain a clear pattern and volumetric effect, a magnet is brought to a fresh layer of varnish.

    An unusual effect, when the highlights are located along the edges of the nail, and only the pigment is visible in the middle, is obtained if you hold the magnet with the end part perpendicular to the nail plate.

    The ombre effect is achieved by holding a magnet to the outer edge of the nail. In this case, the metal particles move to the tip of the plate, as a result the color smoothly flows from dark to light shades.

    More complex designs can be obtained by using 2 to 4 magnets. The manicure looks elegant and harmonious if the design is symmetrically located on all nails.

    How to keep your manicure longer

    The life of your manicure will be long if you follow simple rules.

    Recommendations:

    • protect from contact with detergents with aggressive components, do all housework with gloves;
    • never pick up anything with your fingernail - chips and scratches may appear;
    • In the first days, do not keep your hands in the water for too long and avoid temperature changes.

    Some leave the holes at the base of the nail unpainted so that the coating lasts much longer.

    What kind of magnet is needed for the “Cat's Eye”? Types of magnets

    It is the magnet that determines what kind of pattern you will end up with on your nails.

    Today, there are a wide variety of magnet options on store shelves. Among them the following main types can be distinguished:

    1. rectangular;
    2. round;
    3. magnetic pens.

    Let's take a closer look at each type.

    Rectangular

    Using a rectangular magnet (bar), you can create simple but interesting effects:

    • a straight line that can be made in any part of the nail: on the side, in the center and even diagonally. It all depends on your preferences;
    • French: to do this you need to attach a magnet to the edge of the nail;
    • reverse French: in this case, the magnet should be applied not to the edge of the nail, but to its base. As a result, we will get a hole.

    There are bar magnets with patterns, which makes it easier to create complex designs.

    However, if you do not have such a magnet, but have 2 ordinary bars, then you can easily create interesting patterns, for example:

    • zigzag. To do this, 2 magnets need to be turned towards each other so that resistance is created and placed on opposite edges perpendicular to the nail. With this arrangement, you should get a smooth zigzag;
    • star. To do this, on the contrary, you need to connect 2 magnets and place the connection point in the center of the nail plate.

    NOTE! There are magnets with and without a handle. For beginners, the option with a handle is more convenient!

    Round

    Using a round magnet you can create not only a circle, but also smoother lines.

    By the way, there are 2-in-1 magnets: there is a rectangular magnet at one end and a round one at the other.

    Magnetic pens

    Using magnetic pens you can create thin and neat lines. The pen must be held perpendicular to the nail plate and worked slowly to ensure that the drawing is clear. Such pens can be point-shaped, with several points at the end and even a ball.

    With a magnetic pen you can create a lot of interesting designs, such as floral motifs. To do this, you need to draw round spirals with a pen in different parts of the nail. As a result, we will get drawings that look like roses. And with the help of a magnetic pen with balls at the end, you can create such complex patterns as, for example, “snake skin”.

    Nail preparation

    Before applying the varnish, it is necessary to spend 15 minutes in a bath consisting of salt, infusion of medicinal herbs and essential oils. Once the hands are prepared, several procedures are undertaken to prepare the nails.

    1. The nail plates are given a long shape, the edges are processed with a glass file, all irregularities on the surface are buffed, since it should be without irregularities and outwardly matte.
    2. The nails are wiped with a degreasing liquid, which must be allowed to dry for 10 minutes. After this, a base coat is applied.
    3. In cases where there are natural unevenness on the nails, you need to use a special base that smoothes out all the unevenness.

    The more carefully the preparatory work is done, the better the final result will be.

    Rating
    ( 2 ratings, average 5 out of 5 )
    Did you like the article? Share with friends:
    For any suggestions regarding the site: [email protected]
    Для любых предложений по сайту: [email protected]